Instruction Manual

INSTRUCTIONS FOR USE

Charging the speaker

For best results, fully charge the speaker before its first use.

1. Connect the USB charging cord (included) to the DC 5V charging port of the

speaker and insert the other end into a port on your computer or similar power

source.

2. Red LED glows indicating that the battery is being charged. Once it is fully

charged, the Red LED will turn off. It will take around 2-3 hours to fully charge

the battery.

Turn On/Off the Speaker with LED Lantern

Press and hold the “Power” button for 1-2 seconds until you hear the indication tone.

Blue LED indicator light will blink, your speaker is now ON and is entering “pairing”

mode.

Press and hold the “Power” button for 1-2 seconds to turn off the speaker.

Turn the speaker to Bluetooth pairing mode -

1. Press and hold the “Power” button for 1-2 seconds until you hear the indication tone.

2. Blue LED indicator light will blink, your speaker is now ON and is entering “pairing”

mode.

(Note: Speaker automatically pairs with the previously paired devices)

Pairing your device with Bluetooth Speaker –

Your Bluetooth Speaker can wirelessly stream audio from any Bluetooth enabled device

within the distance of 27-33 Feet. Simply follow the below steps.

1. Press and hold the “Power” button for 1-2 seconds until you hear the indication

tone.

2. Blue LED indicator light will blink, your speaker is now ON and is entering

“pairing” mode.

3. Turn on the Bluetooth on your Mobile Phone or Tablet or Computer.

4. It will search for various devices.

5. The pairing name of our Bluetooth Speaker is “Sound Touch”, pair it with

this device.

6. You might be prompted with “Pair with Sound Touch?” message on your

source device, with “Cancel” and “OK” options. Please click “OK”.

7. If required, enter the password ‘0000’ to confirm the finalised pairing.

8. Once paired successfully, you would hear an indication tone and the blue LED

indicator light will stay on.

9. If you fail to pair it within the time frame or you want to pair it with a new device

please follows the steps outlined above.