Bluetooth speaker YM-S1 INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE 1
Getting started Remove the Bluetooth speaker & accessories from the box. Remove all packaging from the Bluetooth speaker. Place the packaging inside the box to either store or dispose of safely.
Safety Instructions Read this manual carefully before putting the appliance into operation and keep this manual for future reference. Keep the device away from heat, direct sunlight and sharp edges. Keep the device away from naked flames. Do not insert any metal object into the device. Risk of short circuit! To avoid a static charge, do not use the device in an extremely dry climate. Do not repair the unit yourself but contact an authorized specialist. Do not submerge in water.
Description of buttons 1 44
3 7 2 6 4 55
1: Power on/off button, Selfie button 2: Play/pause, phone pick up/hang up button---short press, Long press for “M” function, Transfer micro sd card model & Bluetooth mod or AUX mode 3: Short rotate-PREV, Long Rotate- Volume down 4: Short rotate- NEXT, Long rotate- Volume up 5. Micro sd card 6. Aux jack 7. USB charging jack Charging Instructions This Bluetooth speaker comes with a built in rechargeable battery. Before using it for the first time we recommend you charge the battery fully. 1.
Bluetooth pairing 1. Turn on the Bluetooth speaker. 2. Turn on your Bluetooth enabled device and activate the Bluetooth function. 3. Search for the Bluetooth device, “YM-S1” will show up. 4. Pair your Bluetooth enabled device with “YM-S1”. If a password is needed, type in “0000”. After the “YM-S1” is paired with your device, connect it to your device.
Specifications Bluetooth version 3.0+EDR Bluetooth profiles HSP, HFP, A2DP and AVRCP Bluetooth range 10 meters (equal to 33 feet) Frequency range 2.402-2.48GHz Audio Output power 3 watts Frequency response 100Hz-20kHz Distortion ≤1% Microphone sensitivity -40db Playback time 4 hours Charging input power DC 5V Charging time Approx 3 hours Unit size 52*30*82 mm Unit weight Approx.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.
different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. IC Warnings: This device complies with Industry Canada’s licence-exempt RSSs Operation is subject to the following two conditions: (1) This device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
radioélectrique subi, même si le brouillage susceptible d'en compromettre le fonctionnement.