BLUETOOTH STEREO HEADPHONE H7 USER MANUAL
H7 USER MANUAL 1.Introduction Table of contents 1 2 3 4 Introduction Kit Contents Connection Diagram How to use 4.1 General function 4.2 Pairing to mobile phone 4.3 Charging your device 5 Technical specification 6 Service and Support 7 FAQ Congratulations, and thank you for choosing the Stereo Bluetooth Headset H7.
H7 USER MANUAL H7 USER MANUAL 3.Connection Diagram Desired Result Turn off Volume up Low battery warning Enter the pairing mode Volume down Turn on/ Play / pause/ Turn off / Answer call/ End call/ Reject cal/ Transfer call voicel Charging 4.1General Functions Turn on Required Action Press the “ ” button for 3 seconds when the device is off. (Pink LED slowly flashes and a tone voice beep) Enter the pairing Mode Press the “ +” “ -” button in power on mode and hold on for 6 seconds.
H7 USER MANUAL H7 USER MANUAL 4.2. Pairing to Mobile phone or other device To use your Bluetooth Headset, you must first pair your Headset with a phone or a computer. Once your Bluetooth Headset is paired to a specific mobile phone; they will remain paired and automatically recognize each other whenever they are within range. Pairing to a phone and Entertainment: Turn on your phone and ensure its Bluetooth function is activated Turn on the Bluetooth Headset go to the paring mode.
H7 USER MANUAL H7 USER MANUAL 6.Service and Support 5.Technical specification Value Parameter Bluetooth Specification Bluetooth V3.0 Bluetooth Profile HFP1.6 A2DP1.2 RF Range 10 m Frequency Response 60Hz-20KHz Loudspeaker Output 10mW Signal-To-Noise Distortion ≥85dB ≤1.0% Playback Time Charging Time 10 hours 2 hours Standby time 30 days Weight 250g Dimension (L×W×H) 176.6×188.
15.105(b) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
