User's Manual

Turn on/
Play / pause/
Turn off /
Answer call/
End call/
Reject cal/
Transfer call voicel
Charging
Volume down
Volume up
MIC
Previous
Next
3.5mm Earphone
3.Connection Diagram
Enter the pairing
mode
4.How to use
4.1General Functions
Turn on
Enter the pairing
Mode
Pairing
Desired Result
Required Action
Press the “ ” button for 3 seconds when
the device is off. (Pink LED slowly flashes
and a tone voice beep)
Press the “ +” “ -” button in power on mode
and hold on for 6 seconds.(white LED and
Red LED quickly flash alternately with two
beep tone voice).
In pairing Mode use a mobile phone with
Bluetooth function or other Bluetooth
Master Device and to perform pairing
action (detail refer to the chapter about
pairing)
Turn off
Press the “ ” button for 3 seconds when
the device is on.(a tone voice beep and
all LED is off)
Low battery
warning
The red LED flash
Desired Result
Required Action
Charging
Plug the charger to port of the device.
(Red LED is on)
Answer call
Short Press the “ ” button while the call coming
End call
Short Press the button while ongoing call“ ”
Transfer call voice
Double Press the “ ” button to transfer
the call voice between the mobile phone
and device while on going call
Reject call
Press the “ ” button for 1~2 seconds to reject
call when the call is ringing
Volume up
Short Press the “+” button for volume up
Volume Down
Short Press the “-” button for volume down
Next
Short Press “>” button for next music
Previous
Short Press “<” button for Previous music
Battery power
indication
After pairing this device to iPhone The
Battery power will be indicated in your iPhone
Play/pause
Short press “ ”key to play/pause the music
when the Headset is Connected
Multi-point connection
In pairing mode, short press the to
enable the multipoint and double press the
MFB to disable the Multipoint
Factory reset
Long press “>” “<” at pairing mode to reset
clear the paired device list
02 03
H7 USER MANUAL H7 USER MANUAL