Product Description

range.
3) The LED light on the Bluetooth audio receiver turns blue and flickers slowly, indicating that
the connection has been successful.
4) At this time, playing music, music will be wireless transmission through Bluetooth to the
Bluetooth music receiver, let you enjoy music to your heart's content.
Note: if you can’t listen to music properly
A) Make sure your stereo system is connected to the Bluetooth receiver.
B) Check and make sure that your audio volume is kept to a minimum or silent level.
Bluetooth call
1. When your mobile phone defaults to Bluetooth microphone, you can make hands-free calls
through your own MIC when you have phone access.
2. When the mobile phone calls, you can answer the voice call by pressing the switch key, and
then click to hang up the phone.
3. After the call is completed, it will automatically enter the mobile phone previous status.
4. After disconnecting from the Bluetooth device, the Bluetooth receiver will shut down
automatically in 5 minutes.
Indicator light display
Device status
LED status
Matching or Connecting
Red and blue lights flicker alternately
Connected successfully and playing
Blue LED lights flicker every 3 seconds
Sleep mode(standby)
Blue LED lights flicker every 3 seconds
Charge
Red LED is always bright during charging. Full
of electricity, red lights out, blue lights always
on.
Charged and connected
Red LED is always on and blue LED flashes
every 3 seconds.
Troubleshooting
The connection of Bluetooth music receiver is based on the completion of matching. The
connection interruption may be due to the following reasons:
a. The distance between the equipments exceeds 33 feet (10 meters), or there are other
obstacles in the middle (such as walls, furniture, etc.).
b. One or both of them have been shut down. It is also possible there is no electricity.
c. If there is no connection within the prescribed time, the device will automatically shut down
in 5 minutes without any connection, and the device will be reopened for reconnection. Follow
the following steps:
1) Restart the music receiver and transmitter;
2) Re-connect and pair-up after restart;
3) Power the music receiver and transmitter again.
Packaging accessories
⚫ Bluetooth Music Receiver
⚫ USB charging line
⚫ Instructions
Technical parameter
⚫ Supporting Bluetooth A2DP audio playback