User's Manual

X100
Answer call
End Call
Reject Call
Hold Current Call,
Answer Second Call
End Current Call,
Answer First Call
(Being Held)
Reject Second Call
Switch Calls
Switch Phone
Chat Device
Q2: Can not pair
earbuds with your
devices.
(1) Pick up the earbud, it will power on automatically.
(2) Remove All Bluetooths on your device's Bluetooth menu, Reboot
the device's Bluetooth, search "X100" and tap to connect.
Q3: The earbuds fail to
turn on.
(1) Peel off the plastic pieces from both earbuds.
(2) Fully charge the charging case. Then take X100 from the case.
(3) If still no work, hold still the earbuds buttons for 4 seconds to
check if they work or not.
(1) Pair with other devices to check if this issue is caused by X100 earbuds.
(2) Please remove all Bluetooth devices from the Bluetooth menu, then restart
the phone and Connect again.
Q4: The right earbud
can not connect with
the left earbud.
Please try the following steps ：
(1) Please remove all Bluetooth devices from the Bluetooth menu.
(2) Open the charging case and take out the Right earbud, then take
out the Left earbud.
(3) Double click quickly the left and right earbuds at the same time.
(Attention: They should be double click in five seconds)
(4) Confirm the binaural mode by observing the change of the
indicator light. (After connected: The right earbud indicator light will
flash alternately from blue to red; The left earbud indicator light
will turn off)
Q5: The right earbud
cuts out and in.
Q6: The left earbud
is fully charged while
left earbud is not full
charged yet.
The left earbud is the master earbud, so left earbud will consume
a little more electricity than right earbud.
Q7: Other issues?
No bother to return back, feel free to contact us at
[e-mail]. We promise you with a satisfied solution.
Questions
Answers
Q1:Can not find the
earbuds Bluetooth
"X100" on devices.
Need to restore factory defaults.
(1) Take the two earbuds out, then close it.
(2) In the off state, press earbuds button for 2 seconds to turn on.
(3) First double click on the left earbuds, then double click on the right
earbuds. (Attention: It should be quickly double click)
Product Name
Wireless Version
Operation Range
Earbud Charging Time
Charging Case Charging Time
Play Time
Talk Time
Standby Time
Wireless Profiles
Earbud Battery Type
Charging Case Battery Type
PRODUCT SPECIFICATIONS
HOW TO CHARGE
HOW TO PAIR
HOW TO WEAR
HOW TO RESET PAIRING
HOW TO CARE FOR YOUR EARBUDS
CONTROLS
FAQS
CORRECT DISPOSAL OF THIS PRODUCT
WARRANTY
ARE YOU 100% SATISFIED?
USER MANUAL
READ BEFORE USING
X100
V5.0
≤10 Metres (Unobstructed Effective Range)
≤90 minutes
≤150 mlnutes
3 -3.5 Hours (at 75％ volume)
3 Hours (at 75％ volume)
108 Hours
A2DP,AVRCP,HFP,HSP
50mAh Rechargeable Lithium Batteries
2600mAh Rechargeable Lithium Batteries
PACKAGE CONTENTS
PRODUCT DIAGRAM
1
2
3
4
5
6
7
8
X100 Wireless Earbuds
On-The-Go Charging Case
6 × Silicone Eartips
(2 are attached)
1 × Carrying Pouch
1 × Charging Cord
Operation Manual
Microphone Hole
Multi-Function Button
Charging Contact
Micro USB Port (Input)
USB-A Port (Output)
LED Indicator
Charging The Earbuds
1. When the earbuds is low on battery, the red indicator flashes 2 times every
three minutes, prompting three times. At the same time, the voice prompts
"low battery, please charge".
2. When the earbuds are charging, the blue light flashes. When the battery is
fully charged, the light is off.
(When charging the earbuds, please refer to the following charging
indicator light)
Charging The Charging Case
1. When the charging case is low on battery, the indicates light will flash twice
every 1 second, and the light will go out after 10 seconds.
2. When charging, the blue light of charging case is blinking. When it is fullly
charged, the blue light will illuminate.
Battery Level
Battery Level
The Charging Case LED Indicator Light Status
The Charging Case LED Indicator Light Status
0 ~ 33%
33 ~ 66%
66 ~ 99%
100%
0 ~ 33%
33 ~ 66%
66 ~ 99%
100%
One blue light flashes once every 2 seconds
Two blue lights flash twice every 2 seconds
Three blue lights flash thrice every 2 seconds
Blue light is off
The first blue light flashes once every 1 second
The second blue light flashes once every 1 second
The third blue light flashes once every 1 second
Three blue lights keep light
First Time to Pair with Devices:
Note: Before first time using, please remove the isolation film on
the earbuds and put the earbuds into the charger to fully charge; The
right earbuds is main earbuds, TWS pairing is controlled by the main
earbuds.
Second Time to Pair with Devices ：
*The earbuds turn off automacally when you put them back to the charging case.
（To manually power off, long press the earbuds buons for 4 seconds）
*The le and right earbuds can be used separately to make calls and play music.
1. Open the chargeing case and pick up two earbuds, the earbuds will
automatically turns on and enter the TWS pairing mode.
(After connected: The right earbuds voice prompts "Enter pairing mode"
and indicator light flashes red and blue light alternately; The left earbuds
indicator is off)
Take two earbuds out, the earbuds automatically enters the TWS
pairing mode, then automatically connects to the last successfully paired
mobile device. (TWS binaural pairing takes 4 seconds, Bluetooth earbuds
and device connection takes 8 seconds)
2. Turn on the Bluetooth, search for earbuds pairing name "X100",
and click to connect. (After connected: The right earbuds voice prompt
“Pairing Successful” and earbud indicator lights off after 5 seconds.）
① Select the earbuds of suitable size.
② Put earbuds into your ear canal.
③ To get the best sound, the top of the carrying pouch should fit tight
into the ringe of the ear.
1. Turn the left and right earbuds on manually.(In the off state, press
earbuds button for 2 seconds to turn on)
2. First double click on the left earbuds, then double click on the right
earbuds. (Attention: it Should be quickly double click)
Always store the earbuds in the charging case to keep it safely.
Avoid storage at extreme temperatures. (Above 45℃ / 113℉ or
below -0℃ / 32℉) Otherwise, it will shorten the battery life and
affect the earbuds.
Listening to Music
Play Music
Pause Music
Next Songs
Previous Songs
Activate/Stop Siri
Press either earbud button for once.
Press either earbud button for once.
Press the right ear for two seconds
Press the left ear for two seconds.
Double press either earbud button.
Making and Answering Calls
Press either earbud button for once.
Press either earbud button for once.
Press the either earbuds for two secons.
Press either earbud button for once.
Press either earbud button for once.
Press the either earbuds for two seconds.
Press the either earbuds for two seconds.
Press the either earbuds for two seconds.
(Waste Electrical & Electrical Equipment)
This symbol shown on the package or its literature indicates that it should not be
disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human healthy from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
X100 comes with an industry-leading 12 months warranty that
begins from date of purchase.
The warranty applies to the X100 Bluetooth Earbuds and necessary
parts. The warranty does not apply to damage resulting from failure to
follow the instructions, accidents, abuse, alterations, or disassembly by
unauthorized individuals.
If you have questions or concern of our product, don't hesitate to contact us
directly at:
[e-mail]
X100 Earbuds has an award-wining warranty, exchange, and
customer service program that guarantees hassle-free solutions to
any issue you might have within 24 hours.
①
②
③
④
⑤
⑥