Table of Contents 1.Introduction........................................................................................................1 1.1 Product Descriptions....................................................................................1 1.2 Main Functions............................................................................................ 1 . 2.Package Contents................................................................................................2 3.Installation Procedure........
1. Introduction 1.1 Product Descriptions Thank you for choosing WT003 Motorcycle Bluetooth Communication System.The WT003 is a Bluetooth Headset designed for the motorcycle rider and passenger who wish to have clear and reliable wireless communications while riding. This headset is compatible with Bluetooth cellular phones and can be suited to any sort of helmet for motorcyclists.
2.Package Contents 3.Installation Procedure 3.1 Installation method with plastic clamp →Using the Headset Clip Mount with Fastening Clamp 1. Using the provided screw driver, loosen the Clips' screws enough to allow the Clip to slide onto either side of the Helmets' shell. 2. Make sure you put the clip under the helmets padding. 3. Adjust the Clip until you find the best location for your helmet 4. Tighten the screws to hold the clip firmly in place. →Mounting the Interphone 1.
3. Next, take the earphone and attach it to the Velcro Pad. Run the Microphone Arm down along down to where your mouth will be. As the Microphone Arm is flexible, you can adjust it so it sits in the optimum position in front of your mouth. Some helmets have removable padding; if yours does, it is recommended to run the earphone and microphone under the padding. 4.Taking care to match the pins up, connect the Headset Plug to the Headset Socket. The plug can only be inserted in one position. 5.
Off:Press the power /intercom button for 5 seconds or until you hear 2 “Di” tones and the lights extinguish. Note: When turn off the unit, please don't loosen the power /intercom button when hear "dudu" tone. If so, the Bluetooth memory will be cleared away. 5.2 Phone Controls ①To answer a call – Shortly press the Phone button once. ②Auto receive call – Dependant on the phone the unit will automatically answer the call after 16 seconds of ringing.
Long press”+”button to increase and long pess”-“ button to decrease. This function is also fit for intercom/music/FM radio function. Note: Depending on the phone some or all of these functions may not work, or operate differently. 5.7 To Reset the pairing memory →If you have problems pairing, then it is best to reset the pairing memory ①Turn on the relevant unit into standby mode. Press the power/intercom button for 3-5 seconds till a “dudu” can be heard. ②Let go of the button when the tone is heard.
④Bluetooth on your phone will search the device until you see BT-S6. ⑤Click “BT-S6” on your phone,you will hear “DiDi” tone when pair successfully. 6.2 Pairing between two devices ①Ensure both devices are off and within 1m visible range of each other.Press down both devices Power/Intercom button for 8 seconds until you see the red light and blue light flash alternatively,both devices enter pairing status. ②Quickly press the Power/Intercom button on either two devices.
Bluetooth version: 3.0+EDR Frequency: 2.4GHz Supports: A2DP and AVRCP Supported Bluetooth Profiles: Bluetooth Headset and Hands free Profiles with Automatic Detection. Operating Range: Up to 10m for cellphones Battery Type: Rechargeable Lithium Polymer 450mAh Stand by: Up to 300hrs Talking Time: Phone up to 10 hours;Intercom up to 8 hours Charging Time: About 3 hours Power Adaptor: DC5V 1A (Optional) 8.Battery and charging instructions Before using this device, Please charge the headset with charger.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
