Product Description

2
2.Package Contents
3.Installation Procedure
3.1 Installation method with plastic clamp
→Using the Headset Clip Mount with Fastening Clamp
1. Using the provided screw driver, loosen the Clips' screws enough to allow the Clip
to slide onto either side of the Helmets' shell.
2. Make sure you put the clip under the helmets padding.
3. Adjust the Clip until you find the best location for your helmet
4. Tighten the screws to hold the clip firmly in place.
→Mounting the Interphone
1. Take your interphone Headset and
slide it down into the slots in the
Headset Clip Mount. Make sure that
it's perfectly fitted and locked into
place by trying to extract it, pulling
upwards.
2.Now you need to attach the earphone
and microphone arm to the inside of
the helmet. Take the Velcro pad which
the speaker will attach to, and test for
the best position to fix it. The Velcro
Pad should be fixed at the height of
your ear in the helmets ear pocket. You
will need to put the helmet on a few times to find the optimum position to apply the
pad. When the correct positioning is found, remove the protective strip and apply the
Velcro Pad.