Product Description

3
3. Next, take the earphone and attach
it to the Velcro Pad. Run the
Microphone Arm down along down
to where your mouth will be. As the
Microphone Arm is flexible, you can
adjust it so it sits in the optimum
position in front of your mouth.
Some helmets have removable
padding; if yours does, it is
recommended to run the earphone
and microphone under the padding.
4.Taking care to match the pins up,
connect the Headset Plug to the
Headset Socket. The plug can only be
inserted in one position.
5.Secure the cord of the Headset Plug inside the helmet. Tuck any extra wire into the
helmet. Ensure that only few centimeters of the cord comes out. You have successfully
mounted the interphone.
3.2 Installation method with velcro clamp
You can directly use the Velcro(with 3M) to mount the interphone on the edge of
helmet. See the following pictures.
4. Quick removal of the bluetooth device
Remove the WT003
Interphone by pushing down the lock as shown and then take out the
interphone module in an upward motion.
5.Functions and operation of buttons
5.1 Turning on / off the unit
On:Press the power /intercom button for 4 seconds until you hear a “Di” tone.The blue
light will flash 3 times swiftly and then turn into regular intervals.