Product Description

5
Long press”+”button to increase and long pess”-“ button to decrease. This function is
also fit for intercom/music/FM radio function.
Note: Depending on the phone some or all of these functions may not work, or operate
differently.
5.7 To Reset the pairing memory
→If you have problems pairing, then it is best to reset the pairing memory
①
Turn on the relevant unit into standby mode. Press the power/intercom button for
3-5 seconds till a “dudu” can be heard.
②Let go of the button when the tone is heard.(The unit will turn off)
③
Restart, the memory will be erased. (Pair again)
5.8 Switching mode
①
Switch Between Intercom and Music/FM Radio:When in intercom mode,shortly
press the Power/Intercom button and a “bee” prompt tone can be heard.After,switching
between music and FM radio, please refer to “②”.
②
Switch Between Music and FM Radio: Double press the Phone button to FM Radio.
When listening to the FM Radio, double press the phone button to exit FM Radio, then
shortly press the Phone button once time to music.
③A. If the intercom headset is also connected to the mobile phone, when there is a
phone call, the intercom will automatically disconnect, switch to the mobile phone
headset to answer the call, and automatically resume the intercom state after the call
ends;B. The operation needs to be effective within a limited distance;C. It takes about
5 seconds to switch back from the mobile phone call state to the Bluetooth intercom
state.
5.9 To Use Audio Cable
Audio cable can insert cable input interface, it can connect MP3, GPS, Mobile phone
and so on.
Postscript:Walkie-talkie Audio cable also can insert cable input interface, it can
connect walkie-talkie, so it can intercom for a group of people at the same time.
(Walkie-talkie Audio cable need to purchase separate).
Cable adapter is different, according to different model of walkie-talkie.
6. Pairing method
6.1 Pairing with Bluetooth enabled mobile phone
①
Ensure the Bluetooth intercom headset is off and within 1m visible range of the
Bluetooth enabled mobile phone to be paired.
②Turn on the unit into standby mode (only need blue light flashing).
③Open the Bluetooth function on your mobile phone. (Some phones need to be set up
so that all Bluetooth devices around can be detected).