Product Description

6
④Bluetooth on your phone will search the device until you see BT-S6.
⑤
Click
“
BT-S6
”
on your phone,you will hear
“
DiDi
”
tone when pair successfully.
6.2 Pairing between two devices
①Ensure both devices are off and within 1m visible range of each other.Press down
both devices Power/Intercom button for 8 seconds until you see the red light and blue
light flash alternatively,both devices enter pairing status.
②
Quickly press the Power/Intercom button on either two devices.Then it will search
for the other devices for pairing.When the blue light flashes regularly it means pairing
is successful.
③If this fails retry it ensuring both red/blue light sequences are initiated
simultaneously and are close together. Also ensure any other Bluetooth devices are
turned off.
④
When paired, you do not need to go into pairing mode again. In future you only
need to go into standby mode (blue light flashing) on both units and press the button
on one of the devices.
Note: When 2 bluetooth devices need to pair for intercom, also need to connect mobile
phone, you should following the instruction:
i: Firstly, two Bluetooth devices need to pair for intercom successfully,(see the above
instruction), then turn off the two Bluetooth devices.
ii: Turn on one of Bluetooth devices, also turn on the mobile phone Bluetooth, let the
mobile phone connect the Bluetooth device successfully.
iii: Turn on the other Bluetooth device, next, you only need to press the Bluetooth
device (any one of two is OK) power/intercom button, the two Bluetooth devices can
intercom now.
6.3 Pairing between three devices
①
Follow the above procedure for each combination of the three units. (A-B, B-C,
A-C).
②Ensure the third unit is switched off when pairing the other two devices.
③
Only one connection can be live at a time. When successfully paired the connections
can be switched by ending any live call and returning to standby.
④From Standby press the power/intercom button 1 time for one of the pairings to be
called, or 2 times for the other pairing to be called. The pairing for 1 or 2 presses will
depend on the sequence in which you paired the 3 helmets, but once paired the
relevant pairings will maintain the number.
⑤
A will press the power/intercom button 1 time to call B and 2 times to call C;B will
press the button 1 time to call C and 2 times to call A;C will press the button 1 time to
call A and 2 times to call C.
7.Technical parameters of product