Users Manual


your app if it is, then enter your Wi-Fi
password to connect to wireless network,
click OK to connect the device.
4. Connection succeed.
Note: If you have registered an account
before, just log in directly.
4.2.2 Connect the device in AP mode
If the device is not connected to your phone,
the Wi-Fi icon flashes rapidly by default.
Press and hold the “ ” button for seconds
to switch to AP mode, the Wi-Fi icon flashes
slowly in AP mode.
1. Open the app and click “ + ” to start the
connection.
2. Plug in the Sous Vide, choose the Sous
Vide, click “ AP Mode ” of the right top corner
, check if the Wi-Fi icon is blinking
slowly and confirm on your app if it is, then
enter your Wi-Fi password to connect to
wireless network, click OK to connect the
device.
3. The app will redirect to your phone’s
WLAN Setting interface, select the
“ SmartLife-XXXX ” to directly connect to the
router without typing in password. Go back
to the app and enter the automatic
connection interface to click “ Done ”.
4. Connection succeed.
4.3 Wi-Fi Reset
Press and hold the “ ” button for 5