Quick Installation Guide

Figure 1 Figure 2
4) Choose the mode you want. (We describe repeater mode in details here. About
AP mode, you only need connect router LAN port with repeater RJ45 port by
network cable, configure SSID & Password step by step).
5) Repeater will scan neighbor WiFi automatically, after scanning finished, select
your WiFi router SSID from pull-down list, enter your WiFi router password, click
“next”.
Figure 1 Figure 2 Figure 3
6) The repeater SSID will change to your router’s SSID with suffix_2.4GPlus or
5GPlus, WiFi password will be same as your router after your WiFi router
information entered, also you can rename the repeater SSID and WiFi password
as you want. Then click “next” to continue.