Quick Installation Guide

7) Please set repeater login password once repeater SSID & WiFi password
configuration finished. It will be same as WiFi password if you don’t change. Then
click “Configuration completed”. An information page will be appeared to show
your current configuration.
8) Re-connect repeater with configured SSID and password and enjoy internet
service now. Please make sure all your configuration is correct, you will need
enter login password after 1
st
time quick installation. Please refer below Figure 1
and Figure 2.
Figure 1 Figure 2
Note: For better performance, follow the on-screen tips or below steps to
relocate your repeater.
i. Plug the repeater into an outlet halfway between the router and WiFi dead
zone,the location you choose must be within the range of your existing WiFi
network.
ii. Wait until the Signal LET turns green. If not, please relocate the repeater
closer to the router.