Installation Instructions

10.Wrong Operation
11.Safety Information
Use a balloon or a soft brush to remove
dust from the inside or the gap of the
optical waveguide lens.
When storing or transporting the glasses,
please store them in the Portable glasses
case to avoid any damage.
9-2-1 How to clean the shading
lens.Wipe the shading lens with
accessory lens cloth.
9-2-2 How to clean the optical
waveguide lens
Wipe the optical waveguide
lens with accessory lens cloth.
To avoid damage to the glasses, please avoid the following actions.
· Move the temples too far to the outside, or apply any force beyond the mechanical load
· Keep it spinning or moving back and forth
· Toss it (The lens is fragile )
· Bind it with a cable
Warnings
11-1：Keep the glasses dry. Don’t wear the device in a dusty, humid or high-salt environment (such as by the sea) to avoid circuit failures.
11-2：Do not use the device during thunderstorms, which may cause device malfunction or risk of electric shock.
11-3：Use the device below 2000 meters above sea level, above 0℃ and below 40 ℃；Store the device and its accessories in the range of -20
℃ to 60℃；When the ambient temperature is too high or too low, it will shorten its life cycle or may cause other failures.
11-4：If the device needs to be charged, make sure to use the original cable for charging.
11-5：If the device needs to be connected to the USB-Type-C(I) port for charging, the user must confirm that the USB port has the
USB-Type-C logo and its performance complies with relevant USB-Type-C specifications.
9-1 Routine Maintenance 9-2 Lens Care 9-3 Storage Specification