User Instructions

Instructions for Switch Wireless Controller

Wireless Game Controller

Model No.: SP5226

Manufacturer：Shenzhen CHT Technology Co., Ltd.

Button Descriptions:

1. Direction Pad (D-pad)

2. Action Buttons

3. Left Analog Stick (L2)

4. Right Analog Stick (R2)

5. HOME Button(Power on/off)

6. LED Indicator 1,2,3,4,

7. Turbo Button

8. Capture

9. Menu selection -

10. Menu selection +

11. Left triggers

12. Right triggers

13. Reset(Power off)

Main Features:

1. Use with Nintendo Switch console

2. Dual Shock

3. With turbo function, Capture function, Home function.

4. With 0.8m charging cable

5. Two high quality analogue sticks come without any dead zone

6. Bluetooth version: 2.1+EDR

7. Built-in 500mAh Li-ion battery, support 6 hours working time.

8. With sensor, no NFC, no awake-up function

Turbo Feature:

1). Press and hold one action button, then press the Turbo button, Turbo feature will be valid. For an example, Press and

hold A, then press T, action order of A will keep going.

2). Based on above 1) state, press T to stop Turbo function.

PAGE 1
Instructions for Switch Wireless Controller Wireless Game Controller Model No.: SP5226 Manufacturer：Shenzhen CHT Technology Co., Ltd. Button Descriptions: 1. Direction Pad (D-pad) 2. Action Buttons 3. Left Analog Stick (L2) 4. Right Analog Stick (R2) 5. HOME Button(Power on/off) 6. LED Indicator 1,2,3,4, 7. Turbo Button 8. Capture 9. Menu selection 10. Menu selection + 11. Left triggers 12. Right triggers 13. Reset(Power off) Main Features: 1. Use with Nintendo Switch console 2. Dual Shock 3.
PAGE 2
Pairing Methods: First time to connect: 1. Press and hold the HOME button for 5 seconds and 4 indicators blinks fast. 2. Go to Switch's controller pair settings. Choose "Controller"→ "Change Grip/ Order"→Press "L + R "on Controller. 3. Press the "A" button to start working. If the connection is successful, the corresponding channel light keeps on. Second time to connect: Press the HOME button on any page, and 4 indicators blinks slowly. Functions of LED indicators： 1.
PAGE 3
FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.