How-To Guide

3 / 6
5 times
Delete all user cards
Three long beeps. Red light blinks. Buzzer beeping twice
quickly means deletion completes.
6 times
N/A
One short beep. Red light blinks.
7 times
Reset the lock to default
One long beep. Red light links. Buzzer beeping twice
quickly means resetting completes.
3.Set Up User Card
3.1. Swipe admin card. One beep. Motor turns (unlock). Green light blinks. Enter the mode of setting up user card.
3.2. Swipe a new card. One long beep means setting successfully. Repeat this step to set another user card.
There will be 2 short beeps if this card already exists (set up before)
Up to 200 user cards can be set up.
3.3. If the lock doesn’t detect an effective card, it will exit user-card-set mode.
4. Delete User Card
Setting
Operation
Sound/Light
Delete single user card
Swipe an admin card twice
1 long beep, green light blinks
Swipe the card you want to delete
1 short beep
Deletion succeeds
Repeat steps above can delete other cards.
If the card doesn’t exist, there will be 2 short beeps
Delete single lost user
card
swipe admin card 3 times
2 long beep, green light blinks quickly
Swipe the card set before the lost
one
1 short beep
Deletion succeeds
Repeat steps above can delete other cards
If you lose the first user card, swipe the last user card to delete it in this mode.
Delete all user cards
Swipe admin card 5 times
3 long beep, green light blinks, 2 beep
Deletion succeeds
Touch Screen Usage
Touch screen panel is under dormancy mode to extend battery life. Touch “5” to activate the screen. Back light on
means that screen is activated. The screen will go back to dormancy mode if no input within 5 seconds.
Set Up Password
The default admin password is 12345678. Input admin password and press # button. Buzzer beeps one time. Unlock.
Green light blinks. Choose the corresponding functions.
Password Instruction
Function Button
Function
Sound/Light
1
Change admin password
One long beep, green light and red light blink alternately
8
Set up user password
One long beep, green light blinks
4
Delete next user password
one long beep, red light blinks
0
Delete all user passwords
Three beeps, red light blinks
9
Set up passage mode
(unlock always)
Red light on, one long beep, unlock, enter passage mode;
Green light on, one long beep, lock, cancel passage mode
7
Reset the lock to default
One long beeps, red light blinks, buzzer beeps twice quickly
means resetting completes.
Settings
Operations
Sound/Light
Change admin password
Input the old admin password and #
1 short beep, red and green light blink
alternately
Press button “1”