How-To Guide

5 / 6
press button #
after 5 beeps
Re-input password
Done
Press button * to exit
5. Unlock
5.1 By RFID Card
Swipe a card in the sensing area, motor turns after 1 beep, green light on. Unlock. The lock will re-lock automatically if it
detects the action of opening door by the handle. If no action, 3 seconds later, green light off, it will re-lock automatically.
5.2, By Admin Password
Input admin password and #, 1 beep, motor turns, green light on, unlock. The lock will re-lock automatically if it detects
the action of opening door by the handle. If no action, 5 seconds later, green light off, it will re-lock automatically.
5.3, By User Password
Input password and #, 1 beep, motor turns, green light on, unlock. The lock will re-lock automatically if it detects the
action of opening door by the handle. If no action, 5 seconds later, green light off, it will re-lock automatically.
5.4, By mechanical Key
You can use the metal key to unlock anytime. (Tips: You can put a sticky tape on the keyhole cover, and move it off
quickly.)
Remarks:
A. If password or card is invalid, there will be 3 short beeps, the red light turns on.
B. if the power is low, there will be 5 continuous beeps, red light turns on. After the low power alarm alerts for the first
time, the lock can unlock about 200 times at least. To enusre the normal use, please replace the batteries ASAP..
C. The keypad will be locked for 5 minutes after 5 consecutive wrong inputs.
Technical Parameter
*Working Voltage: 6.0V(4x AA alkaline batteries) *Static Consumption: below 100uA
*Dynamic Consumption: below 300uA *Battery life: over 10 months (4x AA quality alkaline batteries)
*Low power alarm voltage: 4.5V *Card Max Sensing Distance: above 25mm (125KHz RFID card/tag)