Safety Tips

1
4
7. TF Card slot: External Micro SD card, up to 128GB.
First Use
Battery Management and Charging
●Please make sure that the device battery is fully charged on first usage.
●Just plug the charger into DC interface for charging.
●Keep the first two charging time about 6 hours. And around 4 hours next time.
【
NOTE
】
This item was featured with built-in polymer battery, the charger
should be comply with the specification of Input: AC100-240V, 50/60Hz, Max:
0.3A. Output: 5V/2A.
●The battery icon will scroll during charging.
●Screen battery icon will turn green and stop scrolling when charging
completed.
●To extend the battery life, suggest run out of the power in the first two times.
【
NOTE
】
If the device is not used for a long time, make sure the machine will
be charged one time within one month, to avoid excessive consumption.
●On lower power shutdown, plug the charger, the machine tips “lower power”
and “charging”, the device will enter to the menu if there is enough power.
●It’s better to charge in standby, otherwise the changing time will be longer, as
the screen consume battery during charging.
Desktop - First Appearance