Safety Instructions

Table Of Contents
Information about Safety and Comfortable use
Safety instructions
Please read this instrutor carefully. Please Save this document for future reference. Please follow
the warning signs and instructions on the device.
Please cut off the power of the product before cleaning.
Please cut off the power of the product before cleaning. Do not use chemical or spray cleaners.
Please wipe with a damp cloth.
WARNINGS!
·Keep this product away from water.
·To avoid slipping and cause damage, do not place this product on a unstable platform.
· Notches on the computer case is for heat dissipation purposes. Do not block or cover these
notches to avoid over heat. In addition, do not put this computer on bed mattress, sofa,
blanket, or other simular places. At the same time, keep this product away from heat sources
such as electric heater.
·Do not insert any other items into the notches of the device to avoid accidental contact with
the circuit, causing a short circuit, fire or electric shock. Do not spill any liquid onto the
product.
·Do not put the device on a vibrating surface to avoid damage internal components and cause
power leakage.
Power Supply
· The device will only work properly under the voltage type indicated on the label. If you are
unsure of the type of voltage you are using, please consult your dealer or local power
company.
·Do not place anything on the power cable or place it where it can be easily stepped on.
· If an extension cable need to be used, the total power consumption of the connected
equipment must NOT exceed the total load of the extension cable.At the same time, the total
power consumption of the equipment connected to the socket must NOT exceed the total load
of the fuse.
· Do not insert too many devices to overload the power outlet, power distribution board, or
outlet. The total load of the system must not exceed 80% of the rated power of the branch
circuit. If a switchboard is used, the load shall not exceed 80% of the rated power of the main
switchboard
·This product's AC adapter is equipped with a three-wire grounded outlet and the plug is only
suitable for a grounded electrical outlet. Before plugging in the AC adapter plug, make sure the
power outlet is properly grounded. Never plug the plug into an ungrounded electrical outlet.
Please contact your electrician for details.