Product Card
Table Of Contents
a) Set the broadcast mode bit -Bluetooth
4. After the setup is completed, restart
5. Turn on the computer, look for bluetooth 【btgrblesp】, and connect.
6. Open the operating software, select the corresponding serial port and click the connect button
to connect
Connection mode 3(WIFI_AP mode):
1. Turn on the machine power
2. Open the WIFI connection list of mobile phone or computer
3. Select the network "GRBL_ESP", password: 12345678. (please disconnect the wired
network for PC), and wait for the network connection
4. Then open the browser and enter the IP address of the controller ("192.168.0.1" in the
example) in the address bar to open the Web control interface
Link mode 4(WIFI_STA mode):
1. Turn on the machine power
2. Open the WIFI connection list of mobile phone or computer
3. Select the network "GRBL_ESP", password: 12345678. (please disconnect the wired
network for PC), and wait for the network connection
4. Then open the browser and enter the IP address of the controller ("192.168.0.1" in the
example) in the address bar to open the Web control interface
5. Set the parameters as shown below