Product Card

a) Set WiFi name
b) Set WiFi password
c) Set that address of the control panel in the same segment of the route
d) Set Telnet parameters
6. After the setting is completed, restart, then open the browser and enter the IP address of the
controller in the address bar ("192.168.31.127" in the example) to open the Web control
interface
Third, matters needing attention
1. safety matters
1. It is forbidden to directly irradiate the eyes of human beings or animals, otherwise it will
cause harm to the eyes!
2. Do not irradiate human body, animals, clothes, valuables, etc., otherwise it will cause injury
or damage!
3. It is forbidden to be used by children or people who have no ability to operate!
4. It is forbidden to use in places with inflammable and explosive articles or combustible gases,
so as to avoid fire or explosion!
5. It is forbidden to look directly at the laser focus when engraving the machine. If you need to
observe, please wear protective glasses!
6. Never look at the laser focus for a long time, otherwise it will affect your eyesight!
7. Please turn off the power when not using the machine.
2. Carving instructions
1. Pay attention to the accuracy of focal length before carving!