SW-BNT User Manual make sure you read this guide before using the wireless controller reading the guide will help you learn to use the controller properly
1.Pack Contents 1 x Switch controller 1 x 1.2M Charging Cable 1 x User Manual 2.Products Features Wireless Controller for switch. Includes 4 LED indicators to indicate the connection port(player number)and the battery low power status. Sleep function,automatic power off. 600mAh rechargeable battery pack,it is charged using the type-C plug in the controller.
. How to pair the Switch Pro Controller The Pro Controller can be paired to the Switch console in the following ways. USB Connection Pairing: Place the N Switch console in the dock. Connect the Pro Controller to the dock with the included USB cable . Additional Information: This option [Pro controller Wired communication] needs to be set to on.
Button Pairing or Wireless Pairing. From the HOME Menu, select “Controllers,” then “Change Grip and Order.” While the following screen is displayed, press and hold down the SYNC Button for at least one second on the Pro Controller you wish to pair. (1) (3) (2) (4) Additional Information: The console must be powered on. It is not possible to pair a controller while the console is powered off or in sleep mode. Once paired, the player LED(s) corresponding to the controller number will remain lit.
4.TROUBLE SHOOTING for first connection Solution 1: When your controller has been connected,please just press[A Button] one time to confirm. If you press two times [A button],controller connected will be disconnected.
7.Battery Warnings This controller works ONLY with the battery pack LI-ON 3.7V/600mAh built-in. Do not use the product if it appears to be damaged or leaking,showing discoloration,shape or any other changes. If battery leakage occurs avoid contact with skin,cloths,and wipe off any deposit.if contact occurs,immediately wash thoroughly and check with a doctor.
Connect the USB charging cable included with the Pro Controller to the controller and then to an available USB port on the dock. While connected directly to the Nintendo Switch AC adapter. Connect the N Switch AC adapter directly to the Pro Controller and then to a wall outlet. Additional Information: It takes approximately six hours in order for the N Switch Pro Controller to fully charge. Once the Pro Controller is fully charged, the recharge LED beside the USB connector will shut off.
10.Specification Battery Built-in polymer lithium battery Battery using time About 22 hours Charging time About 2 hours Charging method USB DC 5V Charging current < 500mA External dimensions Approx. 157x110x57mm (width X height X depth) Mass Approx.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.