Directly Connected Alexa Light Instruction Manual
Product Name:Led strip lights input voltage: AC110-220V Output voltage:DC 5-24v Maximum power: 24W 1.
2. Remote control function: Please pull the strip light away, do not roll it for a long time (it is easy to burn out the strip light when rolling it). After connection, connect the power adapter to the patch panel or wall socket. After power-on, the strip light will light up and check whether there is any bad light. If everything is normal, use the configured remote controller to test the function.
3. Connect Alexa 3.1 Download “Amzon Alexa APP” in the app market 3.2 Add your Echo sound to “Amzon Alexa APP” (Echo sound after the second generation has mesh function) 3.3 Make sure the Echo stereo at home is turned on and connected to the home network (if not, please refer to the instructions for Echo stereo) 3.
3.5.2 Connect the strip light by “Amazon Alexa APP” Download the "Amazon Alexa" software in the application market, adjust the strip light to the distribution network mode according to the above "3.
Federal Communications Commission Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
