User's Manual

- 2 -
FILE NUMBER：
MODEL：ZT-842T
PAGES: 2 OF 4
Operation instruction
1. Connecting the receiver antenna. (Figure 1)
2. Connecting the 9V/12V direct current stabilizer (Figure 2), pilot lamp lighting (Figure 3).
3. Connecting the audio and video (figure 4) output with the input to the monitor, the television
should be set on A/V model.
4. Connecting the audio and video output with the input of the transmitter.
5. Plug power jack of DC power supply (5V, 700mA) into the power socket of the CMOS camera
(figure 6). (Battery of the same voltage is acceptable.)
6. Turning the micro-adjustment knob (figure 5) on the receiver till receiving the picture of the
wireless camera.
7. Fine tune to the desire position till the image of CMOS camera is received.
8. Adjust the lens of the CMOS camera (figure 7) to best position.
Notice
1. The machine is supplied with many different types, please provide with electric power according
the value on the label.
2. Obstructs by the building and so on will cause attenuation.
3. Normally that the machine will slightly warm up during operation.
4. Should any other malfunctions occur, please contact local distributor.
5. Under normal operational conditions, one year’s warranty is granted .if there are quality problems
within 3 months, this company will unconditionally replace with a new camera.
6. Please power down when charge.
Waning
This product is for the sole purpose of security and applicable for monitoring in residential
houses, shops and companies. The user shall observe local rules, regulations and laws, and
shall be solely liable in this regard. This company shall not be liable for any illegalities therein.
SHENZHEN ZHONGWANG ELECTRON CO., LTD
TEL：[phone]
FAX：[phone]
http://www.ztv.cc