User's Manual

User Manua
Smart Watch
1. Description of Appearance
(1). Product Introduction
(2). Charging Cable
Touch
Screen
Temperature
Sensor
Heart Rate Lamp
Charging
Interface
Magnetic
Charging Wire
3. Operation
Instruction
Tap the screen or raise your
hand to wake up the screen,
swipe up, down, left, and right
to switch the interface, click to
enter or confirm, swipe right on
the function list and secondary
interface to return or exit.
4. Function Description
(1). Switch machine
<1> Power on: Touch the screen for 5 seconds or charge and turn on, then
enter the main interface.
<2> Power off: Select the shutdown option in the setting menu, the shutdown
interface appears, select "√", as shown in the figure below:
5. Notes
Disclaimer
(1). Bluetooth Connection:
<1> Please turn on the mobile phone Bluetooth and the smart watch before connecting.
<2> Please ensure the smart watch has not been bound with other account when
searching for Bluetooth.
<3> Please keep the smart watch as close to the mobile phone as possible when searching
for Bluetooth.
(2). Please turn on the mobile phone notification push and allow permission of backstage
running if the mobile phone has installed "Mobile manager" or other similar APPs,
otherwise the watch will not receive and push the messages.
(3). Charging instruction: Please use 5V 0.5~1A charger to charge the watch. If the watch
won’t be used for a long period, please turn it off and charge the watch once every month.
(4). To ensure the accuracy of measuring result, after entering the blood pressure monitor
mode, please hold the smart watch at the same height as your heart, relax yourself and
calm down. Please do not speak when measuring blood pressure.
Note: This function is to monitor the blood pressure variation before and after exercise.
The data are for reference only and should not be used as a basis for medical purposes.
Warning: This product is not a medical device. The smart watch and its APP
should not be used as diagnosis, treatment or preventive treatment for diseases
and sickness. Please consult medical professionals before changing exercise habit
or sleeping habit to avoid serious injuries. Our company reserves the right to
modify and improve any functions described in this user manual without further
notice. Our company also reserves the right to continuously update the product
content. This user manual is for reference only and the smart watch for selling is
subject to the final product.
(5). Heart Rate Monitor
Click the heart rate interface. Full-day heart rate
monitor: Turn on this function on the APP "More
Settings", Measure every half hour.
(6). Sports
Walking/running/cycling/skip rope/cycling/basketball/football/badminton: sync all
exercise data with the APP after successful Bluetooth connection. Click "Start
Test" on the exercise interface, select the sports mode you want. Enter the
sports mode interface and check the exercise data: distance, calorie, heart rate.
Slide left or right on the screen to exit the sports mode.
(7). Body Temperature Measurement
It is recommended to test under normal
temperature environment.
2. Downloading & Binding
(1). Long touch the screen for 5 seconds to turn on;
Please make a full charge before use it for the first
time. If the battery is low, It cannot start normally.
(2). Scan the QR code on the right to download and
"JYouPro" APP; Or download and install "JYouPro"
from Apple App Store or Android Google Play.
Compatible System: Android 4.4 and above, iOS 9.0 and above,
Bluetooth 4.0 and above.
(3). Binding the watch
<1>. Click the "Device" in the mobile APP. <2>. Click to bind "Scanned Device".
<4>. The binding is successful.
Slide down
Shortcut
bar
Left slip
Function
card
Slide down, Pull down menu
Sliding up Function list
(2). Language Settings
Turn off automatic synchronization and the
watch can switch languages by itself. Turn on
automatic synchronization and the language is
the same as the phone language.
(3). Count Steps
Record steps, distance and calorie
consumption of the day. Sync data with the
APP.
(4). Sleeping Monitor
Automatically detect sleep time and status
when worn at night, Sync data with the APP.
<3> Lift wrist to wake up the screen: In the
APP setting, raise your hand to turn on the
screen to realize the raised hand to turn on
the screen, lift up to turn on the screen, and
turn back to turn off the screen.
(8). Blood Pressure Measurement
Please make sure you are relaxed when measuring
blood pressure.
<3>. Click the ID number that is
consistent with the watch MAC. The iOS
system will show a request for Bluetooth
pairing, and click "Pairing". The Android
system can be connected directly.
(9). Blood Oxygen Measurement
Click to enter blood oxygen measurement.
(12). Music Control
Enter the music menu, click "play" to play the
music of the mobile phone; click to pause or
continue playing; click to play the previous
song; click to play the next song.
(16). Other Functions
Reminders for step counting goals, drinking water reminders, sedentary reminders,
phone search, brightness adjustment, flashlight, medication reminders, alarm clock
reminders and more.
(14). Stopwatch
Stopwatch interface, select start, pause, resume,
reset timing, slide right to exit the stopwatch
function.
(15). Screen lock
Click on the lock screen, the screen display will be
locked, no other operations can be performed, you
need to long press the screen for 3 seconds to
unlock.
(13). Weather
Connect the mobile APP, you can synchronize
the day information of the current day and the
next 4 days.
(10). Notification
Turn on the App "message push, call reminder, SMS
reminder" to synchronize other APP messages such as
Skype/Twitter/Line/Facebook/WeChat/Phone/QQ/SMS
(requires mobile phone to enable notification
permission in the settings); long in the information
content interface Press to delete the message.
(11). Camera Remote Control
Android system: Turn on the mobile phone APP,
enter the ENT interface on the watch and choose
camera, click "shutter" on the watch or shake the
watch to take photo. iOS system: Enter the ENT
interface on the watch and choose camera, open
the camera function on the mobile phone, shake
the watch or click "shutter" on the watch to take
photo.
Model: ZW66
Use the magnetic suction charging wire attached to the metal contact on
the back of the watch, and the other end of the charging line can be
connected to the USB charging head or the USB interface of the computer.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.
Electrical Parameters
Main Chip
Bluetooth
Battery
Charge
Heart rate sensor
LCD
Dailog 14683
BLE 5.1
3.7V 200mAh
5V 0.1~0.2A
VC31B
1.69”