Version F e b , 2017 Notice 58MM Portable MINI Thermal Printer All rights reserved. Reproduction of any part of this manual in any form whatsoever, without manufacturer’s express permission is forbidden. The contents of this manual are subject to change without notice. Instruction Manual All efforts have been made to ensure the accuracy of the contents of this manual at the time of going to press.
Instruction Mannual Notes on safety This section presents important information intended to ensure safety and effective use of the printer. Please read carefully. Be sure to use the specified battery and power source provided by our company. Connection to an improper power source may cau se fire , explosion or damage to the printer. Don’t put the battery into the fire or water, don’t disassemble or modify the battery, don’t be short circuit, otherwise may result in injury or f ire even explosion.
Instruction Mannual 58MM Portable MINI Thermal Printer Printing Width: 48mm (384dot) Emulation: ESC/POS command Paper Width: 58±01mm Interface: standard RS232/USB, Bluetooth 3.0&4.0(option)/SPP agreement or Roll Diameter: φ≤40mm infrared/IRCOMM agreement (optional)/Android up to 4.0 operation system. Driver: Paper Type: Thermal Paper Win2003/Win2000/Win7/WinXP/VISTA/WIN8/Win10/LINUX Power: rechargeable lithium battery/NI-MH battery Working Temperature: -10～50℃ ; Humidity: 10～90% Battery: 7.
Instruction Mannual 58MM Portable MINI Thermal Printer Charging: Red Light Full: Blue Light Unconnect: Light off Connect: Light (Green ) Charging: Red Light Full: Blue Light 9 V DC Model:5807 Size:112*82*53mm Weight:210g( without battery ) Model:5802 Size:102*78*46mm Weight:134g( without battery ) Charging: Red Light Full: Blue Light 4.Communication Interface 1. RS232(COM)：standard RS232 Communications Protocol 2. Bluetooth 3.0/4.0：standard Bluetooth 3.0/4.0 Communications Protocol 3.
Instruction Mannual 4-1.
Instruction Mannual 58MM Portable MINI Thermal Printer Paper diameter Max 40mm. (Note: Default PIN code is “1234”, you only can reset PIN code with four Thermal paper installation method is as follows: figures.
58MM Portable MINI Thermal Printer Instruction Mannual Step 2: - Find the File Named “ SDK” from the CD driver, Then follow the path : “ Android SDK---BLUETOOTHDEMO ----bin----BT-POSPrinter.APK “ , and install it into your Android device. Power off the printer, then hold down the【FEED】 Set printing density button and press the power button at the same time.
Instruction Mannual 58MM Portable MINI Thermal Printer 2. Turn on the Bluetooth setting of IOS device , then click “POS-Printer”: 3. Into the App of “POS-Printer”, select the paper width as below: 5, If connect with Bluetooth, then you can click “ Select Printer” first, you will search the “Bluetooth Printer” (the default name of printer is Bluetooth Printer), click it to be connected. (Image 3) 4.
Instruction Mannual 58MM Portable MINI Thermal Printer 6, If above steps are successful, then you can print text to have a test: 7, Other features of this APP: ① Send HEX: In the text box, enter the hexadecimal data, click “Send HEX”, then can send text box hexadecimal data to the printer.
Instruction Mannual 58MM Portable MINI Thermal Printer 8.The Bluetooth configuration Step1: Make sure your device ( like PC, Note Book ) has B luetooth function, then once the Bluetooth for your device is activated, you will see the Bluetooth sign showed in the right bottom side of your device(like PC) screen. Step4:if you can see screen as below,then the device is searching the bluetooth printer,please wait. Step2:Power on the Bluetooth printer.
Instruction Mannual 58MM Portable MINI Thermal Printer Step5:Once the Bluetooth printer is found. You can see it listed on the screen, click “Next” ( Note: The Bluetooth device will automatically assign a COM port.) Step8: Now if you want to test if the printer is OK to print, you could use a com tool , and send printed data to Outgoing COM port( just as above image shown: COM5). Step6:Choose “Let me choose my own passkey”, then enter “1234” ( this is (Com tool setting is 9600,N,8,1.
Instruction Mannual 58MM Portable MINI Thermal Printer 4.Click :Next”after the operation in the below figure(Customer can also modify the path of the driver can choose the default installation path) 2.Then select the language click “OK”,as shown below ,click”Continue”to next step. 5.Then click”Next”after the operation as shown below ,choose “install”, if you computer has antivirus software ,appears to block the installation of the windows allow this operation. 3.
Instruction Mannual 6.Wait for the installation interface appear as follows after the completion , 58MM Portable MINI Thermal Printer 8.Completing the driver installation ,as shown below: choose your computer’s operating system ,then select the printer model (POS58 series printer),if you use a USB interface to communicate , click “USB Port Check”automatically recognize the computer USB port ,click Next to continue ,as shown below: 7.
Instruction Mannual 58MM Portable MINI Thermal Printer 10. Serial (COM) port to be used 1. Open the Printer Properties screen, and then select the "Port" item, as shown 115200 below: You can see the setting parameters of serial port from self-test page, Click "Apply", then click "OK" (Note: This setting must consistent with the setting parameters of serial port from the printer self-test page, otherwise it will be garbled case) appears as shown below: 2.
Instruction Mannual 58MM Portable MINI Thermal Printer Click "Apply" again. 3.Return to the "General" tab, click "Print Test Page" as shown below: 11.Cleaning of printer head Cleaning of printer When the printer has the following conditions, you should clean the printer head: 1 The printer does not print clearly and the thermal paper is Ok. 2 The printer Print pages lengthways is not clear 3 It’s getting too noisy while feeding paper or printing. Printer head cleaning steps are as follows: 1.
Instruction Mannual 12.General Troubleshooting 58MM Portable MINI Thermal Printer 9. The printer can't work A：The battery maybe without electricity，please use power adapter to charge. Then you try to star the printer, if the printer has same problem, please 1: Why serial port printer printing messy code? A: Ensure the baud rate setting in the PC is same as the printer baud rate.
FCC warnings: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
