User Manual

1 1
1 2
Instruction Mannual
58MM Portable MINI Thermal Printer
Power off the printer, then hold down the【FEED】
button and press the power button at the same
time. Wait until the power indicator &【ERROR】
led are both on, and then 【ERROR】led goes out,
after, 【ERROR】led goes on again ,then loosen
the【FEED】button, the density setting status
will be printed out. (It has three levels setting for
printing density, it is a circle Low level Middle
level High level Low level…, Please switch
the density status by repeating operation presented
above.)
Set printing density
out, then loosen the【MODE】button. The printer
turns into the hexadecimal printing mode and
print the presentation.Way to quit hexadecimal
printing : The way to quit hexadecimal printing
mode is switch off the printer .
Power off the printer, hold down the【MODE】
button and press the power button at the same
time. Wait until the power indicator &【ERROR】
led are both on, and then 【ERROR】led goes
Hexadecimal printing
6.Operating Manual for Android OS
7.Operating Manual for IOS APP
This manual applies to all of our android OS compatible printers
( both 58mm & 80mm width printer)Currently, the common communication ports we
used for android OS are ( USB、Ethernet、Bluetooth )
If you want to use Android Device connected with our printer, first of all
make sure that printers can be supported Android Operate System, proceed
as follows ( Bluetooth as example):
Step 1:
- Insert the CD driver disc into the CD-ROM, connect your Android device
with your computer;
Step 2:
- Find the File Named “ SDK” from the CD driver, Then follow the path : “ Android
SDK---BLUETOOTHDEMO ----bin----BT-POSPrinter.APK “ , and install it into your
Android device.
Step 3:
- Connect your Android device with our printer once the installation done .
Step 4:
- Find this icon on the Android device, and click “Connect Printer” to search the
Bluetooth printer, (Default pairing password for Bluetooth connection is “ 1234” ) .
After the connection successfully, click on the "Print Test Page", the printer will work
.
1. Download the Test Tools “POS-PrinterV1.0” from App Store,as below:
(Image 1)
If you use the "Ethernet interface", "USB" communication, replace "
BLUETOOTHDEMO" from "Step 2" into the corresponding "NETDEMO", "USBDEMO" .
Please noted, the customers can get all the original code from below path if you need to
develop your own APK ( Path is
src com z
: )
j printdemo