Instruction Manual
1
2
3
4
5
6
7
Portable thermal printer
Instruction Manual
Printing Method: Direct Thermal
Speed: ≤90mm/sec
Reliability TPH Life: 100km
Resolution: 203DPI (8dot/mm)
Printing Width: 48mm (384dot)
Paper Width: 58±01mm
Roll Diameter: φ≤43mm
Paper Type: Thermal Paper
Power: rechargeable lithium battery/NI-MH battery
Battery: 7.4VDC, 2000mAh
Charging mode: USB 5V/2A
Print parameters: support to download the Logo trademark, support bar-code
print.
Support bar-code types: UPC-A / UPC-E / JAN 13 (EAN13) / JAN8 (EAN8) /
CODE39 / ITF / CODABAR / CODE93 / CODE128 ; Two-dimensional code:
QR CODE
Character size: 384 dots/line
FontA:12*24dots,1.5(W)*3.0(H)mm
FontB: 9*17dots, 1.1(W)*2.1(H)mm
FontC: 9*24dots, 1.1(W)*3.0(H)mm
Simplified/Traditional:24*24dots,3.0(W)*3.0(H)mm
Printing Chinese character: Chinese: simplified Chinese 24x24 point. support
GB18030 font library, support Taiwan and HK traditional(complex font)
ANK: ANKcharacters
Language: support for multiple languages
(Support Traditional, Korean, Japanese, etc. must be instructed before
purchased )Extended character table:
OEM437/Katakana/OEM850/OEM860/OEM863/OEM865/West Europe/Greek
/Hebrew/EastEurope/Iran/WPC1252/OEM866/OEM852/OEM858/IranI I /
Latvian/Arabic/PT1511251/OEM747/WPC1257/Vietnam/OEM864/Hebrew/
WPC1255/Thai
Mo d el:5809
Si z e:112*8 3 * 54mm
We ight:2 6 0 g(without batte r y )
Paper house
Jagged saw
Feed button
Power button
Power Indicator
Charging indicator
Status Indicator
USB charging port
(Charging: red light,
full: blue light)
Red light flashes, low battery
The printer use 58MM thermal paper, and adopt to easy paper loading. So
the paper is very convenient install.
（3）Put out a little of the paper outside printer,then close the top cover.
（4）Use paper sawtooth tear off redundant paper
POWER（Blue Light） MO DE（Red Light ） Printer Status
OFF OFF Printer Close
ON（Always） OFF Printer open and have paper
ON(Always） Flash Printer Open , without paper
Under the normal working status, the paper feeding
begins when press FEEDb utton, and stop when
loosen FEED button.
The printer paper feed
Power off the printer, then hold down the【FEED】
button and press the power button at the same
time. Wait 2 seconds ,then loosen the【FEED】
button,the current setting will be printed out.
The printer Self test
Power off the printer, then hold down the【FEED】
button and press the power button at the same
time. Wait until the power indicator &【ERROR】
led are both on, and then 【ERROR】led goes off,
then loosen the【FEED】button, the language
setting status will be printed out.
Transformation in both
English and Chinese
Paper diameter Max 43mm.
Thermal paper installation method is as follows:
（1） Open the printer top cover
（2） Thermal Paper as follow Graph to put into paper storehouse
This manual applies to all of our android OS compatible printers
( both 58mm & 80mm width printer)Currently, the common communication
ports we used for android OS are ( USB、Ethernet、Bluetooth and WiFi )
If you want to use Android Device connected with our printer, first of all
make sure that printers can be supported Android Operate System, proceed
as follows ( Bluetooth as example):
Step 1:
- Insert the CD driver disc into the CD-ROM, connect your Android device
with your computer;
Step 2:
- Find the File Named “ SDK” from the CD driver, Then follow the path : “ Android
SDK---BLUETOOTHDEMO ----bin----BT-POSPrinter.APK “ , and install it into your
Android device.
Step 3:
- Connect your Android device with our printer once the installation done .
Step 4:
- Find this icon on the Android device, and click “Connect Printer” to search the
Bluetooth printer, (Default pairing password for Bluetooth connection is “ 1234” ) .
After the connection successfully, click on the "Print Test Page", the printer will work
If you use the "Ethernet interface", "USB", "WIFI" communication, replace "
BLUETOOTHDEMO" from "Step 2" into the corresponding "NETDEMO", "USBDEMO"
and "WIFIDEMO".
Please noted, the customers can get all the original code from below path if you
need to develop your own APK ( Path is: )
src com zj printdemo
1. Download the Test Tools “POS-PrinterV1.0” from App Store,as below:
(Image 1)
2. Turn on the Bluetooth setting of IOS device , then click “POS-Printer”:
3. Into the App of “POS-Printer”, select the paper width as below:
(Image 3)
4. Select the way of communication of printers, “Bluetooth” or “WIFI”:
5, If connect with Bluetooth, then you can click “ Select Printer” first, you will search
the “Bluetooth Printer” (the default name of printer is Bluetooth Printer), click it to
be connected.
Emulation: ESC/POS command
Interface: Bluetooth 2.0&4.0(option)/SPP agreement
or infrared/IRCOMM agreement (optional)/Android up to 4.0 operation system.
Driver: Win2003/Win2000/Win7/WinXP/VISTA/WIN8/Win10/LINUX
Working Temperature: -10～50℃ ; Humidity: 10～90%
1. Bluetooth 2.0/4.0：standard Bluetooth 2.0/4.0 Communications Protocol
ZJ-5809
Manufacturer: SHENZHEN ZIJIANG ELECTRONICS CO., LTD