User's Manual

-23-

[Name] Print and return to standard mode in page mode

[Format] ASCII FF

Hex 0C

Decimal 12

[Description] Prints the data in the print buffer collectively and returns to standard mode.

[Details] · The buffer data is deleted after being printed.

· The printing area set by ESC W is reset to the default setting.

· The printer does not execute paper cutting.

· This command sets the print position to the beginning of the line.

· This command is enabled only in page mode.

[Reference] ESC FF, ESC L, ESC S

[Name] Print and carriage return

[Format] ASCII CR

Hex 0D

Decimal 13

[Description] When automatic line feed is enabled, this command functions the same as LF;

when automatic line feed is disabled, this command is ignored.

[Details] • Sets the print starting position to the beginning of the line.

• The automatic line feed is ignored with a serial interface model.

• This command is set according to the DIP switch 1-1 setting with a parallel

interface model.

[Reference] LF

CAN (*)

[Name] Cancel print data in page mode

[Format] ASCII CAN

Hex 18

Decimal 24

[Description] In page mode, deletes all the print data in the current printable area.

[Details] · This command is enabled only in page mode.

· If data that existed in the previously specified printing area also exists in the

currently specified printing area, it is deleted.

[Reference] ESC L, ESC W

DLE EOT n (*)

[Name] Real-time status transmission

[Format] ASCII DLE EOT n

Hex 10 04 n

Decimal 16 4 n

[Range] 1 £ n £ 4

[Description] Transmits the selected printer status specified by n in real-time, according to the

following parameters:

n = 1: Transmit printer status

n = 2: Transmit off-line status