User's Manual

-39-
⑤Set printable area width: GS W
• The following command is ignored in page mode:
①Execute test print: GS ( A
• The following command is not available in page mode:
①Print NV bit image: FS p
② Define NV bit image: FS q
③ Write to user NV memory: FS g 1
④Print raster bit image: GS v 0
• The printer returns to standard mode when power is turned on, the printer is
reset, or ESC @ is used.
[Reference] FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \
ESC M n (*
)
[Name] Select character font
[Format] ASCII ESC M n
Hex 1B 4D n
Decimal 27 77 n
[Range] n = 0, 1, 48, 49
[Description] Selects character fonts.
n
Function
0,48
Character font A (12 ´ 24) selected.
1,49
Character font B (9 ´ 17) selected.
ESC R n
[Name] Select an international character set
[Format] ASCII ESC R n
Hex 1B 52 n
Decimal 27 82 n
[Range] 0 ≤ n ≤ 15
[Description] Selects an international character set n from the following table:
n Character
0 U.S.A.
1 France
2 Germany
3 U.K.
4 Denmark
5 Sweden
6 Italy
7 Spain
8 Japan