GP1260 IAX2 Phone User Guide Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave.
INDEX 1. 2. PRODUCT OVERVIEW ......................................................................................... 4 FEATURES AND SPECIFICATION ....................................................................... 4 2.1. Hardware Features.......................................................................................... 4 2.2. Software Features ........................................................................................... 5 2.3. Standard and Protocol...............................
6.2.3. Call Waiting ........................................................................................ 28 6.2.4. Switch between two calls.................................................................... 29 6.3. Blind Transfer ................................................................................................ 29 6.4. Call Forward.................................................................................................. 29 6.4.1 Forward Unconditionally ............................
1. PRODUCT OVERVIEW IP is the acronym for Internet Protocol. An IP phone is a telephone which transmits voice over network based on IP protocol, for example LAN (Local Area Network), MAN (Metropolitan Area Network) and INTERNET. The most significant feature of IP phone is transporting voice over data communication network with almost no extra cost and comparable voice quality and various supplementary services. Using IP phone, you will save tremendously on international calls and long distance calls.
● Program Memory—2 MB Flash memory ● Display LCD—128 X 64 Graphics Dot. ● Ethernet Port—2X 10/100M Connectors 2.2. Software Features ● DHCP support for LAN or Cable modem ● PPPoE dialup ● Built in web server for configuration and upgrade ● On phone menu for configuration through keypad ● Automated provisioning of firmware and configuration via HTTP ● Manual upgrade firmware via HTTP; ● Multiple audio codec support: PCMU;PCMA;G.726-32;GSM6.10;iLBC;Speex;G.
● Auto-Answer ● Do-Not-Disturb ● Configurable Dial Plan Support ● Phone Book with 100 entries ● Speed Dialing Support (10 entries) ● Call History: Missed, Answered, Dialed Numbers with call time (10 each) ● Adjustable volume for handset, ring volume and speaker etc. ● Hot Line Calling 2.3. Standard and Protocol ● IAX2 (Inter-Asterisk-eXchange V2) ● IEEE 802.3 /802.3 u 10 Base T / 100Base TX ●Support for Layer3 Qos (Diff-Serv) and Layer 2 Qos (802.
● SNTP:Simple Network Time Protocol ● Syslog:The BSD syslog Protocol 2.4. Electric Requirements ●Voltage: 9V DC ●Power: 4.5W (max.) 2.5. Size 238 x 188 x 70 mm (L x W x H) 2.6. Operating Requirements ●Operation temperature: 0 to 45° C (32° to 113° F) ●Storage temperature: -30° to 85° C (-22° to 185° F) ●Humidity: 10 to 90% no dew 3. INSTALLATION 3.1. Parts List Check this following list before installation to make sure that you have received all items.
3) One Universal Power Adapter 4) One product qualification and guarantee 5) One User Guide CD-ROM 6) Quick Simple User Manual 7) One RJ-45 Ethernet cable 3.2. Connecting the Phone 1. Connect handset to base: insert the handset cord into a handset cord jack on the left side of the base. 2. Connect the phone to Network: plug the RJ-45 Ethernet cable into the Ethernet Jack. Plug the other end of the cable into HUB or switch. 3.
Power LCD Display Network1 Network2 LED LED LED Mute/ DND Speed dial Transfer M1---M10 Hold VOL+/UP Message Right Menu Left VOL-/Down Cancel Redial Speaker OK Flash Call Fig 4.1.1 GP1260 Phone Front ● GP1260 IAX2 Phone Back Illustrations(Refer to Fig 4.1.2 ) Network connect 1 Network connect 2 Power Jack Fig 4.1.2 GP1260 IAX2 Phone Back 4.2. Function Keys Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave.
Keys Function Keys MENU M1-M10 Speed-Dial key, each corresponds to a speed dial number which will be called by a single press. UP(▲) Function When phone is idle, press this key to enter MENU mode. Increase the output volume of handset or speakerphone. In MENU mode, press this key to scroll up. DOWN(▼) Decrease the output volume of handset or speakerphone. In MENU mode, press this key to scroll down menu options. ▲ ) LEFT( ▼ ) RIGHT( In EDIT status, press this key to backspace.
POWER LED MESSAGE LED On: the power supply is all right. Off: the power supply is disconnected. On: There are unread voice messages. Off: No new voice message. HOLD LED On: The call is on hold . MUTE/DND LED On: Local voice is muted when in a call; Do-Not-Disturbed is turned on when phone idle. 5. CONFIGURATION GUIDE After the phone is properly installed, users can use keypad or web browser to configure its parameters. 5.1. Configuration with Keypad 5.1.1. Using function keys 1.
2. Scroll the menu Press UP(▲), DOWN(▼) key to scroll through menu items. 3. Enter the submenu Press OK key to enter the next level of the menu. 4. Edit and confirm Press OK key to enter the edit mode, when current menu item has no submenu. A cursor will appear in this mode. Press OK key to confirm the input. 5. Delete a character and move cursor Use LEFT key to backspace and RIGHT key to shift cursor right in edit mode. 6.
5.1.2. Viewing System Info Step 1: With the phone on-hook, press MENU key to enter the main menu. Step 2: Press UP(▲), DOWN(▼) key to scroll to System Info submenu. Step 3: Press OK key to enter the System Info submenu. Step 4: Use UP(▲), DOWN(▼) key to scroll through the basic information of the phone, including IP Address, Phone Number, MAC Address, Phone Model, Protocol , Language , OEM Tag and Version . Step 5: Press CANCEL key to go back to the upper menu.
5.1.4. Voice Settings Fig 5.1.3 Voice submenu Please check the Web Configuration 5.2.3 for details about these items. 5.1.5. Protocol Settings Fig 5.1.4 Protocol submenu Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave.
Please check the Web Configuration 5.2.4 for details about these items. 5.1.6. Dialplan Settings Fig 5.1.5 Dialplan submenu Please check the Web Configuration page 5.2.5 for details about these items. 5.1.7. System Settings Fig 5.1.6 System submenu Please check the Web Configuration 5.2.5 for detail about these items. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave.
5.2. Configuration with Web Browser Open a web browser and input the IP address of the phone into address bar (default IP: 192.168.1.200). Then put password of the phone into the following page. Default password is empty. Fig 5.2.1 http settings NOTE: Make sure that the phone is in idle mode when viewing or setting GP1260 IAX2 Phone with web browser. 5.2.1.
Fig 5.2.2 Connection Type IP Address Subnet Mask Default Gateway PPPoE User ID Network Setting Static IP:Select this item to let users to set IP address, subnet mask and router IP address manually. DHCP:Have IP address and other network parameters assigned by the DHCP server. Set IP address of the phone manually when Connection Type is set to Static IP. Set the subnet mask of the network when Connection Type is set to Static IP.
PPPoE User PIN Set the User PIN of the PPPoE when Connection Type is set to PPPoE. Automatically Get DNS Server IP Have DHCP server assign the IP address of DNS server automatically. Use following DNS Server IP Set the IP address of DNS server manually. Primary DNS Secondary DNS Set the IP address of the first DNS server. Set the IP address of the second DNS server. Layer 3 Qos When Layer 3 Qos is adopted, fill in the Precedence value of IP frames.
Preferred Voice Codec Voice Frames per Tx iLBC Frame Size Speex rate GP1260 supports up to 7 different Voice Codec types including PCMU, PCMA, G.726-32, GSM 6.10, iLBC, Speex, G.729. Selecting Null disables the corresponding voice codec. Set the number of voice frames transmitted per packet. The suggested number is below 3(including 3) in order to reduce delay. The maximum allowable value is 8. The default value is 1. Select the frame size of iLBC codec: 20ms or 30ms. Select the rate of Speex codec: 2.
Fig 5.2.4 Protocol Settings Enable/disable registration with Asterisk server. To make calls IAX2 Registration through Asterisk Server, please check this box; otherwise, only IP-to IP calls is allowed. IAX2 Server IAX2 Server Port IAX2 User ID IAX2 Authenticate ID IAX2 Authenticate PIN User Name Fill in the IP address or URI of Asterisk Server. Fill in the port of Asterisk Server. The default value is 4569.
5.2.4. Dialplan Settings Fig 5.2.5 Dial settings Forward-to Number Enter the number to which you want to forward the call. Forward Unconditionally Enable/Disable unconditional call forwarding. If set to yes, all incoming calls will be forwarded to Forward-to Number. Forward when busy Enable/disable call forwarding on busy. If set to yes, the incoming call will be forwarded to Forward-to Number when this line is busy. Forward when no answer Enable/disable call forwarding when no answer.
of time - No answer timeout. Enable/disable call waiting. If the phone is already in a conversation when a new incoming call is received. Call waiting Enable: The new incoming call will be displayed on LCD indicating another caller is waiting. User can press FLASH key to hold current call and retrieve the new call. Disable: Reject the new incoming call directly. Dial prefix Set the prefix added to each dialed number.
Fig 5.2.6 System Setting Administration Password Syslog IP Handset input volume Password to access settings, with the maximum length of 32 characters. Set the syslog server IP address. Set the input volume of the handset, ranging from 0 – 7. Handset output volume Set the output volume of the handset, ranging from 0 – 31. Speaker output volume Set the output volume of the speaker, ranging from 0-31. Ring volume Set the ring volume of the speaker, ranging from 10-31.
server. Auto-provisioning port Auto-upgrade interval Fill in the port of the auto-provisioning sever. Default is 80 (we use HTTP to do auto-provisioning). Set the interval of auto-upgrade in minute. The maximum value is 65535 minutes. SNTP Server Fill in the URI or IP address of the SNTP server. Time Zone Select the time zone in list box with user location. Adjust time according to daylight saving time Enable/disable daylight saving time. 5.2.7. Phone Book Fig 5.2.
5.2.8. Digit Maps Fig 5.2.8 Digit Map Digit map is a set of rules to determine when the user has finished entering digits. With digit map, users don’t have to press "call" key after dialing. Fig 5.2.8 gives an example of digit map. X represents any number between 0 and 9. 13xxxxxxxxx: Any 11 digits number starting with 13. 013xxxxxxxxx: Any 12 digits number starting with 013.
X.T: Any digit number. The number is sent out in T seconds after user dialed the last digits. X. [T#*]: Any digit number ended with * or # or after T seconds of waiting. If the number entered matches an item in the digit map perfectly, or it doesn’t match any item at all, this number will be sent out immediately. NOTE About the detail of digit map, refer to RFC3435 2.1.2. 6. USING GP1260 IAX2 PHONE 6.1. Placing Phone Calls 6.1.1.
2. Dial the desired number or IP address (Press * for“. “). 3. Press CALL to complete the call. To make a direct IP address call, disable the” IAX2 Registration” option. 6.1.3. Redial 1. Pick up handset or press SPEAKER key. 2. Press REDIAL key to dial the last call. 6.1.4. Call from CALL HISTORY 1. Press MENU key. Scroll to “Call History” and press OK key to select the desired call record type: “Missed Calls”, “Received Calls” and “Dialed Numbers”. 2.
3. Scroll to “Call ?” item and press OK key to call this contact. 6.1.6. Speed dial When phone is in off-hook or speaker-phone mode, press speed dial key (M1-M10) to call the number associated with each speed dial key. When phone is in idle mode, press M1-M10 to view the name and number information of each speed dial entry. 6.2. Answering calls 6.2.1. Answering a call Pick up the handset or press the SPEAKER key to answer a call. Put down the handset or press the SPEAKER key to hang up. 6.2.2.
current call, press FLASH key to place the current call on hold and answer the new incoming call. 6.2.4. Switch between two calls Press FLASH key to switch between two calls. You can also press the hook to end current call and retrieve the on-hold call. 6.3. Blind Transfer During a call, press (TRANSFER) key to place the current call on hold and obtain the dial tone. Enter the number to which you want to transfer the call. Press CALL key to complete a blind transfer (without consultation).
forwarded to Forward-to Number. 6.4.2 Forward when busy When Forward When Busy is set to yes, If a new call comes when the line is busy, the new call will be forwarded to Forward-to Number. 6.4.3 Forward when no answer When Forward When No Answer is set to yes, if a new call comes and is not answered in a period of time (defined by No Answer Timeout), the new call will be forwarded to Forward-to Number. 6.5.
When phone is on-hook, press MUTE DND status. The mute LED key to put the phone into will light up indicating that phone will reject all incoming calls. To accept incoming calls, press MUTE key again and the mute LED will turn off. 6.8. Checking Voice Message A flashing message LED indicates there are new voice messages. Press MESSAGE key to call the pre-set voice message number to check the new voice message. The message LED will be turned off after that. 6.9. Save/Delete a CALL HISTORY 1.
E.g. The record has been added to the phonebook and with a display: . 6.10. Edit PHONE BOOK 6.10.1. Save PHONE BOOK After phone book entries have been modified,press CANCEL key to back to the main menu, LCD will display “Save Phonebook?”. Press OK key to save the modifications, or press CANCEL key to reject all modifications. 6.10.2. Add a contact 1. Press MENU key. Scroll to “Phone Book” and press OK key to enter. 2. Scroll to “—End of List—“. Press OK key to select “Add Newly?” item.
keypad. Press OK key to confirm. E.g. Add Aimee to phonebook 6.10.3. Modify a contact 1. Press MENU key. Scroll to “Phone Book” and press OK key to enter. 2. Scroll to the desired contact and press OK key to select the action to be taken next. 3. Scroll to “Edit ?” and press OK key to enter. When “Enter name” item displayed on LCD, enter the name through keypad. Use UP key or LEFT key to delete unwanted input. Press OK key to confirm.
6.10.4. Delete a contact entry 1. Press MENU key. Scroll to “Phone Book” and press OK key to enter. 2. Scroll to the desired contact and press OK key to select the action to be taken next. 3. Scroll to “Delete ?” and press OK key to enter. 4. Repeat step 2 and 3 to delete more contacts. E.g. Delete contact Aimee 6.10.5. Delete all contact entry 1. Press MENU key. Scroll to “Phone Book” and press OK key to enter. 2. Press OK key to select the action to be taken next. 3.
Select Upgrade item in the login page and enter the upgrade page below. Fig 7.1.1 manually upgrade 7.1.1. Select upgrade item The available options include Firmware, Settings, Phonebook, Ring tone and Call Hold Music. 7.1.2. Locate upgrade file Use“browse……”button to select the upgrade file. As to how to get these files, please refer to AR1688 Develop Manual. 7.1.3. Start upgrade Click “Start Upgrade” button to start the upgrade. Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave.
NOTE: Upgrade must NOT be interrupted! Upgrading firmware may take a few minutes, Please don’t turn off the power. 8. LOAD AND STORE FACTORY SETTINGS 8.1 Load Defaults Settings 1. Press MENU key. Scroll to “Phone Settings” and press OK key to enter this submenu. 2. Scroll to “Load Defaults” and press OK key. Will be displayed on LCD. Press OK key to confirm. 3. GP1260 IAX2 IP phone will reboot and come up with the factory default settings. 8.2 Store Defaults Settings 1. Press MENU key.
Annex: GP1260 IP phone digital-character key map Keys Once Twice Thrice quartic quintic sixth seventh eighth ninth 1 1 . _ - @ : ; / , 2 2 a b c A B C 3 3 d e f D E F 4 4 g h i G H I 5 5 j k l J K L 6 6 m n o M N O 7 7 p q r s P Q R S 8 8 t u v T U V 9 9 w x y z W X Y Z 0 0 space Room 1004, Building 2, Phoenix Building, 2008 ShenNan Ave.