User’s Manual 01 Introduction Power Button: Press and hold it for 3S to power on/off the watch Charging cable
Note: Please fully charge the watch with the charging cable to turn it on when you receive it for the first time. 02 Wearing Please wear the device on your wrist horizontally, a finger’s width below your wrist bone. And also adjust the tension of the wrist band to a comfortable position. Tip: Too loose band may affect the accuracy of data collected by the heart rate sensor. 03Connection andBinding 1. ①Search and download "InxFit"APP from Apple Store or Google Play.
Note: The InxFit app is only compatible with smartphones, not tablets or PCs. Smart Phone System Requirements: iOS9.0 & higher Android 6.0 & higher Bluetooth 4.0 & higher 2. After installing the APP, Open InxFit APP and log in;Select “Lynn” on the device page to pair the watch to the APP.
① In the process of pairing, please make sure the Bluetooth function of your smartphone is enabled. ②If the watch cannot be found in the process of adding the device, or the watch cannot be connected during use. Please turn on the watch, tap the “Settings” - “System settings” - click“Factory settings”, then try to connect the watch again. ③ If the watch still cannot be found, exit and re-enter the“InxFit”APP to try again.
05 Features Multiple Sports Modes: running, walking, cycling, climbing, skipping, spinning, dancing, yoga, aerobics, badminton, tennis and other training. In Running or Walking mode, you can view the exercise data (heart rate, pace, exercise duration, calories, steps and distance). Heart Rate Monitor: Monitoring the heart rate for 24Hrs;You can also view the historical heart rate data in theInxFit APP.
Women's Health: Women menstrual cycle reminder (Need to be setin the InxFitAPP) Status: Recording daily steps, distance and calories in detail. Sleep: Recording sleep duration and sleep status. (You can check more detailed data in InxFit App) Music Controller:Control the music playing of your smartphone. ;Adjust the volume, Play/Pause/Skip the tracks. (Note: It may not be compatible with some third-party players.
Messages Notifications: Check text messages or social media messages from your phone. (Note: The watch will only display the messages from compatible APP) Settings: QR code of APP, power-off, factory settings and other settings. 06 Charging l. Place the watch on the charger so that the charging contacts on the back of the watch are completely attached to the metal contacts on the charger. (The charging time is about2.
2. Connect the charging cable to a standard charger purchased from authorized distributors, with an output voltage of 5V and an output current of 1A. If the watch cannot be powered on after being charged for a long time, please wipe the charging contacts of the charging cablewhen using it again to remove the residual sweat or moisture. Note: (If the watch is not used frequently, please charge the watch once a month.) 07Basic parameters Hardware parameters Display 1.
Charging mode Waterproofing Magnetic charging IP68 08 FAQ 1. Failure to pair the watch with the InxFitApp on your smartphone. ① Check whether your mobile phone system is Android 6.0 and later version, iOS 9.0 and later version; ② Make sure your smartphone’s Bluetooth is enabled and the watch is not connected to other smartphones. ③ It is recommended to exit the InxFit APP and open it again, and re-enable the Bluetooth before connecting. Then try it again. 2.
Do-Not-Disturb mode enabled Do-Not-Disturb mode disabled 3. How to synchronize the data? ①Automatic synchronization: After the watch is connected to the APP, the data will be synchronized automatically; ②Manual synchronization: After the watch is connected to the APP, you can manually synchronize the data by swiping down the homepage or data page of InxFit APP.
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.