User's Guide

When you use the handle for the first time, you need to connect it with the
current host: first, use the USB cable to communicate with P4 host, then
press the HOME button of the handle, the LED light bar will always light i
n one color, and then the host will be connected.
After different handles are connected to the host, LED light bars display
different colors to distinguish users. When you press the HOME button, t
he LED light bar will emit light in a specific color. The assigned color
depends on the order in which each user presses the HOME button. The
first connecting handle is blue, the second is red, the third is green and
the fourth is pink. Up to four handles can be used at the same time.
If the handle fails to connect with P4 host within 30
seconds in search state, it will enter sleep state.
In the connected state, there is no button operation
for about 10 minutes, and the 3D rocker does not
move greatly, and the handle enters the sleep
state;
Press the HOME button during sleep to wake up
the handle-the sleep time without operation can be set on the console。
The LED light bar will be displayed in breathing light when it is turned off
and charged, and the color will be orange. When it is full, the light will go
out.
If the handle needs to be turned off, please press the PS key for 8-10
seconds, the LED light goes out and the handle is turned off;
When the handle is connected to the host, the
LED light bar flashes white, and then keeps one
color always on. At this time, you can remove the
data cable and use the handle wirelessly.
Match and connect
LED guiding lights