Bluetooth Keyboard with Touchpad User Manual US
LED Indicator & Media Control Email: support@dracool.net Power Switch LED1 2.5 hour 1300 hours Deep Sleep Mode: The keyboard goes into sleep mode after being idle for 30 minutes. LED2 LED3 LED4 Power On/Off: Toggle the switch to ON. The LED3 blue indicator will be on and then turns off after 5 seconds, indicating the keyboard has been powered on. Toggle the switch to OFF to turn off the keyboard. Low Battery Indicator: LED3 flashes red when the voltage is lower than 3.3V.
1. The battery has sufficient amount of energy. 2. The keyboard is within its working range (33ft) 3. The Bluetooth on your pairing device has been turned on. 4. The keyboard and the device are paired successfully. 5. Remove all Bluetooth pairing records on your laptop and pair again. 6. Prevent pairing multiple keyboards to the same device. Press and hold key, press key for 3 seconds, LED1 blue indicator will flash quickly and the keyboard enters into pairing mode.
Huawei Tablet Pairing Steps Samsung Tablet Pairing Steps Press and hold key, press key for 3 seconds, LED1 blue indicator will flash quickly and the keyboard enters into pairing mode. Press and hold key, press key for 3 seconds, LED1 blue indicator will flash quickly and the keyboard enters into pairing mode.
Windows Pairing Steps Press and hold key, press key for 3 seconds, LED1 blue indicator will flash quickly and the keyboard enters into pairing mode. Mac Pairing Steps Press and hold key, press key for 3 seconds, LED1 blue indicator will flash quickly and the keyboard enters into pairing mode.
How to Connect My Device to BT1/BT2/BT3 Channel? Trackpad Gesture Hold and press Press , then press , the LED indicator of the corresponding Bluetooth channel flashes quickly, the keyboard enters into Bluetooth pairing mode. After successful pairing, the LED indicator will be on for 3 seconds and then turns off. and at the same time to enable/disable the touchpad function. 1.
2.iPad iOS 3.Android system Left mouse button Right mouse button Left mouse button Right mouse button Scroll up/down Zoom in/out Scroll up/down Zoom in/out Switch desktop Custom function Switch desktop Back to main interface 4.
Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.