5210A

ManualsBrandsSherbourn Technologies ManualsAmplifier5/5210A

Owner’s Manual for Power

Amplifier Models

7/2100A and 5/5210A

The 7/2100A amplifier has seven 300/200 watt

channels (4 ohms/8 ohms) and the 5/5210A am-

plifier has five 300/200 watt channels. The instruc-

tions, specifications and connections described in

this manual apply to both models.

Thank you so much for your decision to pur-

chase one of our superb Sherbourn amplifiers. We

take enormous pride in the design and build qual-

ity of all of our products and we are confident that

our product will provide you with many years of

enjoyable and trouble-free service. Should you

have any need to call upon our services please feel

free to contact us at the address shown at the end

of this booklet; or, of course, you can contact the

dealership from which you purchased the product.

Full details of the warranty coverage provided

by Sherbourn Technologies can be found at the end

of this booklet.

Safety Instructions

1. Important Safety Instructions! Please read

all the safety and operating instructions shown

in this manual before operating this equipment.

2. The lightening flash within an equilateral tri-

angle shown above is intended to alert you to the

presence of uninsulated ‘dangerous voltage’ within

the product’s enclosure that may be of sufficient

magnitude to constitute an electric shock to per-

sons.

3. The exclamation point within an equilateral tri-

angle shown above is intended to alert you to the

presence of important operating and maintenance

(servicing) instructions in the literature accompa-

nying this appliance.

4. Please retain this manual in a safe place for fu-

ture reference about safety and operating matters.

5. Adhere to all warnings and follow all operating

instructions.

6. Warning: To reduce the risk of fire or electri-

cal shock, do not expose this equipment to rain

or moisture.

7. Caution: To prevent electrical shock do not use

this (polarized) plug with an extension cord, re-

ceptacle or other outlet unless the blades can be

fully inserted to prevent blade exposure.

Attention: Pour pevenir les chocs electriques pas

utiliser cette fuche polarisee avec un

prolongateur, une prise de courant ou un autre

sortie de courant, sauf si les lames peuvent etre

inserees afond ans en laisser aucune partie a

decouvert.

8. For added protection for this product during a

lightening storm or when it is left unattended and

unused for long periods of time it is recommended

that you unplug the unit from the wall outlet. This

will prevent damage to the product due to lighten-

ing or power line surges.

9. Do not use attachments not recommended in this

owner’s manual as they may cause hazards.

Caution For Installation

1. Do please locate the equipment for proper ven-

tilation. For example, the product should never

be allowed to operate while positioned on a bed,

rug, sofa or any such surface where proper ventila-

tion is not possible. Nor should the unit be placed

in a built-in installation such as a cabinet or armoire,

etc. in such a way as to impede the air flow. Al-

ways ensure adequate ventilation openings - please

see later comments regarding such an installation.

2. Locate the product away from heat sources such

as stoves, heat registers, radiators or other appli-

ances including other amplifiers that produce heat.

3. Please mount the equipment in a wall or cabinet

only as described in this owner’s manual.

4. Do not use the equipment near water; for ex-

ample near a bathtub, washbowl, kitchen sink, a

swimming pool or in a wet basement, etc.

5. Do not place the product on an unstable cart,

stand tripod, bracket or table. The equipment is

heavy and should it fall it could cause serious in-

jury to a person and/or serious damage to the equip-

ment.

Sherbourn

Te c h n o l o

ies, Inc.

Summary of content (8 pages)

PAGE 1
Sherbourn Technologies, Inc. Owner’s Manual for Power Amplifier Models 7/2100A and 5/5210A The 7/2100A amplifier has seven 300/200 watt channels (4 ohms/8 ohms) and the 5/5210A amplifier has five 300/200 watt channels. The instructions, specifications and connections described in this manual apply to both models. Thank you so much for your decision to purchase one of our superb Sherbourn amplifiers.
PAGE 2
Connections and Care of the Product Connections 1. Connect this equipment only to the type of AC power source as marked on the unit. 2. Always route AC power cords so that they are not likely to be walked on, or tripped over, or where they may be pinched by items placed on or against them. Always pay particular attention to cords at plugs and/or convenience receptacles and at the point where they exit from the product. 3. Do not defeat the inherent design features of the polarized plug.
PAGE 3
Rear panel view of model 7/2100A Rear panel view of model 5/5210A showing nonfunctional channels in shaded areas amplifier, it is recommended that wherever possible you use the XLR Input for your connection. 4. Your amplifier includes a 12V DC trigger input connector to allow for remote integration with your preamp/control center.
PAGE 4
Trigger Mode Switch On Setting the trigger mode switch to the ON position allows the 7/2100A or 5/5210A to stay “on” all the time. The power amplifier can only be turned off by turning off the front panel switch or by disconnecting the two power cords. Music (Automatic Signal Sensing) Setting the trigger mode switch to the MUSIC position sets the 7/2100A or 5/5210A into an autoon-standby power control mode.
PAGE 5
receptacle is connected to AC power. Specifications Many homes have double outlet sockets which are supported by one 15 amp circuit. If you are using 4 ohm speakers, and you like the amplifier to play very loud through each speaker, (Warning : Exposing your ears to continuous loud levels of sound may result in serious permanent hearing loss) it will be necessary to use two different power supply outlets EACH of which should be supplying separate 15 amp circuits.
PAGE 6
Trouble-Shooting Symptom Possible Causes Amplifier does not power up and the front LED does not turn on. 1. Power cord not connected at the rear “master” AC receptacle. No sound out of all channels. 1. Load connections not checked with LDS switch. Make sure switch is set to OFF to complete the procedure. 2. Trigger mode switch set incorrectly. 3. Music source not turned on. No sound out of channels 1, 2, 3 and 4. 1. Power cord not connected at the rear “slave” AC receptacle.
PAGE 7
Five Year Limited Warranty Subject to the terms and conditions stated below, Sherbourn Technologies, Inc. (Sherbourn) warrants to the original owner that this model 7/2100A or 5/5210A shall be free from defects in workmanship or materials for a term of five (5) years from its date of purchase from an Authorized Sherbourn Dealer. Transfer of this product by its original owner (the ‘Owner’) will automatically terminate this Warranty regardless of when occurring.
PAGE 8
Sherbourn Technologies, Inc., 19-3A Sterling Road, North Billerica, MA 01862 Tel (978) 663-7385 Fax (978) 663-7389 Web www.sherbourn.