Owner`s manual

Reducing noise
Owner’s Manual
16
Reducing noise
Preventing low-range noise
(High-pass filter)
The high-pass filter reduces low-range ambi-
ent noises, such as footsteps or rumbling
caused by the wind.
1. Press the [REC SET] button.
2. Use the [+] and [–] but-
tons to select “HPF”
from the recording set-
ting menu, then press
the [ ] (Play) button.
3. Use the [+] and [–] buttons to select
“On”, then press the [ ] (Play) but-
ton.
4. After the setting process is
complete, press the [■]
(Stop) button.
The PR7 calls up the HOME
screen.
Preventing excessive input level
(Dynamics control)
This function prevents excessive input levels
that could cause audio clipping or noise.
1. Press the [REC SET] button.
2. Use the [+] and [–] but-
tons to select “DYN”
from the recording set-
ting menu, then press
the [ ] (Play) button.
3. Use the [+] and [–] buttons to select
“LIM” (Limiter), “ALC HI” (for soft
sounds), or “ALC LO” (for loud
sounds), then press the [ ] (Play)
button.
4. After the setting process is
complete, press the [■]
(Stop) button.
The PR7 calls up the HOME
screen.