User manual
Page 6
PT-7030: User Manual
7. Zones Button
Used in conjunction with the Options Button (5) to congure Zone 2, Zone 3, and Zone 4.
8. Input Selector Buttons
Press each Input Selector button to select the associated input.
Note: Each Input Selector Button is associated with a specic input conguration (the name
under the button). In addition, the PT-7030 allows you to assign a descriptive name like
“DVD” or “Cable” to each input conguration, and displays those names on the front panel
status display and the OSD when the input is chosen. Changing the descriptive name of an
input conguration will not affect which button it is associated with.
9. Mute Button
Press this button to mute the audio output; press it again to return to the previously set level.
10. Volume Control
Rotate this knob to change the level. The Volume knob on the PT-7030 is a rotary encoder which
instructs the control system to raise or lower the volume using the PT-7030’s precision digitally
controlled analog attenuator.
Party Mode
In Party Mode, the same input is routed to all zones and the recording outputs. This option can be
selected from the front panel by pressing and holding the Zone Button for three seconds. (The front
panel display will show a “P” when Party Mode is engaged.)
To cancel Party Mode, press and hold the Sel button on the remote control or the Options button on
the front panel for three seconds.