User manual

Page 14
SR-8100: User Manual
Remote Control
1
ON
DIRECT STEREO MODE MODE
+ -
TV HDMI 1 HDMI 2
HDMI 3 HDMI 4 B
ON/OFF FREQ+ CH+
AM/FM FREQ- CH -
SUBTITLE AUDIO
B SUR SUR SUB CTR
+ Z2 +
- Z3 -
INPUT VOL
MENU
EXIT
ENTER
RETURN
MUTE
DIM
DISPLAY
8
10
7
11
6
5
8
4
3
2
17
16
15
13
12
9
14
CEC
PTR-101
1. Standby Button
Press this button when the SR-8100 is On to return it
to Standby Mode.
2. Mode Buttons
Press the Direct and Stereo Mode Buttons to switch
the SR-8100 directly into those audio modes. Press
the Mode + and Mode - Buttons to step through the
valid surround sound decoding modes available for
the input that is currently selected. (The modes you
can choose from will depend on the signal being
received at the input.)
Note: When playing DVD and Blu-Ray discs,
your player and the disc itself will probably offer
you a choice of several audio modes. After you
select one, the SR-8100 will determine which
type of audio is being supplied by your source
component, and will ONLY allow you to choose
audio modes that are compatible with that input
signal. (For example, if you select
“Dolby Digital” when playing a disc, the SR-8100
will offer you digital surround options compatible
with that mode, but NOT modes which are not
compatible with it.)
3. Direct Input Selector Buttons
Press one of the Direct Input Selector Buttons to
switch the SR-8100 directly to that input. The button
with the “B” symbol is used to select a Bluetooth
wireless device.
4. Tuner Control Buttons
Press the Tuner On/Off Button to switch directly to the
Tuner as your selected input; press it again to return
to your previously selected input. Use the AM/FM
Button to switch between the AM and FM bands. The
Freq+ and Freq- buttons change between different
AM or FM stations, and the CH+ and CH- buttons
step between any station presets you have created
(station presets are created in the Tuner Setup
menu).