Manualshelf

User manual

ManualsBrandsSherbourn Technologies ManualsAV receiversSR-8100
11121314151617181920
Page 15
SR-8100: User Manual
5., 8. Return and Exit Navigation Buttons
Used to exit a screen or move up a level in some menus. (Refer to the hints along the bottom of the
OSD if you’re not sure which button to use in a given situation.)
6., 14. Enter Navigation Button and Navigation Ring
Use the Enter Button, and the Up, Down, Left, and Right controls on the Navigation Ring for
navigating the front panel and on-screen menus.
7. Display Button
Press this button to toggle the front panel display between displaying information about which input
is selected and displaying the current audio and video modes.
9. Input + and Input - Buttons
Press these buttons to step through the available inputs on your SR-8100.
10. Speaker Level Trim Controls
Use these buttons to temporarily adjust the levels of your various surround speakers. The changes
you make with these controls will not be retained when you turn the SR-8100 Off. You can
separately adjust the levels of the Center Channel, the Surrounds, the Back Surrounds, and the
Subwoofer with these controls.
11. CEC Control Buttons
These buttons are used to send commands from the SR-8100 to other CEC-enabled devices which
are connected to it. Various CEC-enabled devices will respond to some or all of these command
buttons when they are the selected input device. (You may also need to enable this feature on the
source device.) Please refer to the instructions that came with each device for details.
12. Menu Button
Accesses the front panel menu system and the full-color on-screen display (OSD).
13. Dim Button
Press this button to dim the front panel VFD (vacuum uorescent display) on the SR-8100. The
display will get gradually brighter each time you press the button, then, when it reaches the brightest
setting, drop back to the dimmest setting (dim but not fully off).
15. Mute Button
Press this button to mute the audio output of the SR-8100; press it again to return to the previous
Volume level.
16. Volume Buttons
Press these buttons to turn the volume up or down on the SR-8100. The current volume setting is
displayed on the front panel display.