User manual

Page 21
SR-8100: User Manual
Mode Menu
The Mode Menu will allow you to select which mode to use to decode your current input source.
The SR-8100 will normally select the “best” mode that is appropriate for the particular program
source you have selected. You may manually choose a different decoder mode - but will be limited
to those modes that are valid for the input format currently being received (for example, you cannot
choose Dolby Digital mode for an analog input signal).
By default, the SR-8100 will remember your choice, and will use it as the default choice the next
time an input signal of the same format is received. You may change this behavior using the
Setup / Playback Menu.