User manual

Page 30
SR-8100: User Manual
Setup / Speaker Setup Submenu
The Setup / Speaker Setup Submenu allows you to access the menus on the SR-8100 for
conguring speaker sizes and crossovers, levels, and distances.
Note: The Sherbourn Advanced Room Correction System will automatically select optimal
values for the size, crossover point, distance, and level of each speaker. These controls are
provided for users who either prefer to make their own adjustments using a sound level
meter or real time analyzer, or who wish to make “ne tuning” adjustments to the results of
the automatic room correction.
Note: If the Back Channel switch on the rear of the SR-8100 is OUT, then the SBL and
SBR Speaker Outputs will provide audio from Zone 2. If that switch is IN, then the content
provided by those speakers will be controlled by the SR-8100’s conguration menus.
If the Back Channel switch on the rear of the SR-8100 is IN, and Front Bi-Wire is set to On
in this menu, then those outputs will duplicate the Front Left and Front Right Main Speaker
Outputs and can be used to “vertically bi-amp” your front speakers (this menu setting takes
priority over other menu settings, but not the rear panel switch).
If the Back Channel switch on the rear of the SR-8100 is IN, and Front Bi-Wire is set to Off in
this menu, then the SBL and SBR speakers will be assigned to EITHER Surround Back Left
and Surround Back Right, OR FvH (front vertical height) speakers, depending on the setting
in the Setup / Speaker Setup / Size & Crossover Submenu.