User manual
Page 32
SR-8100: User Manual
Enhanced Bass is a special function intended to enhance the bass capabilities of systems with both
Large front speakers and a subwoofer. When enhanced Bass is set to On, bass frequencies from
the front channels are also sent to the subwoofer (even if the front speakers are set to Large).
Note: To congure the SR-8100 as a “regular 7.1 channel receiver”, the Back Channel switch
on the rear panel of the SR-8100 should be IN, Front Bi-Wire in the The Setup / Speaker Setup
Submenu should be set to OFF, and FvH in the Setup / Speaker Setup / Size & Crossover
Submenu should be set to NONE.
Note: If the Back Channel switch on the rear panel of the SR-8100 is in the OUT position,
then the SBL and SBR amplier channels will be assigned to Zone 2. If you do NOT congure
both Back L/R and FvH Speakers to None in this menu, when the Back Channel switch is in
the OUT position, rear surround or front height content will be discarded.