User manual
Page 43
SR-8100: User Manual
Setup / Option Submenu
The Setup / Options Submenu is used to congure the CEC control options, OSD display options,
and Video on Standby feature on the SR-8100.
The OSD Depth setting congures the opacity for the Popup OSD menu.
The OSD Pop Up setting congures whether the main OSD Popup Menu is active or not
(the small popup that momentarily displays sample rate and decoder status cannot be disabled).
HDMI Audio Output congures whether the audio output of the SR-8100 is active (set this to
Amplier if you want the SR-8100 to handle your audio).
Standby Video enables the Video on Standby function, which allows the SR-8100 to continue to
pass video and audio to your monitor even when it is in Standby mode.
The SR-8100 also offers several different levels of CEC control - which helps allow you to congure
the optimum amount of interaction between the SR-8100 and other CEC-enabled components. The
functions available with CEC control will depend on both the SR-8100 and your source components
and monitor, and you may be required to enable or congure CEC settings on your source
components.
Set HDMI CEC Control On to enable the CEC buttons on the remote control to control your DVD or
Blu-Ray player.
Set CEC Auto Source On to enable CEC commands to be passed between the chosen input device
and the SR-8100 (the SR-8100 will automatically come on when you turn your source component
on, and your source component will automatically come on when it is selected on the SR-8100).
CEC PWR Control will enable your SR-8100 and other components to switch each other on and off
(so, for example, your TV will come on when you turn on the SR-8100).