Setting up a lathe or mill instructions

lists input voltage as 120VAC, DO NOT ATTEMPT TO CONVERT TO OTHER
CURRENTS. Models that can be used with any current have a paper label on the end of
the speed control frame which lists the model number as KBLC-240DS.
The machines are normally supplied with a USA type plug but can be easily rewired to
accept a European or U.K. type plug by attaching the wires using the color codes
provided below.
WIRE
USA
EUROPE
100/240 V
BLACK
BROWN
COMMON
WHITE
BLUE
GROUND (EARTH)
GREEN
GREEN W/YELLOW
FIGURE1a-Wire color codes for USA and European connectors.
General precautions
 DO NOT attempt to operate the lathe or mill without first mounting them to a
secure base. (See page 6.)
 DO NOT turn on the motor with a 3-jaw chuck mounted if the jaws are not
tightened on themselves or on a part.
 A chip guard (P/N 4360) is now available that offers additional protection from
flying chips when working near the spindle. It is not a substitute for wearing
proper eye protection but is an excellent level of additional protection. It will also
contain cutting oil to help keep your work area cleaner.