Sherline Model 4000 lathe 4000A shown includes 3-jaw chuck, tailstock drill chuck and standard accessories.
Parts of a lathe
Headstock and Spindle Preload Nut
A bottom view of the lathe bed and crosslide table shows the leadscrews are out of the way where they won’t collect chips. The tapered adjustable gibs on each axis can also be seen.
Taper Turning Optional power feed
A small home shop
Riser Block
Thread Cutting Attachment
Standard Vertical Milling Column
Multidirection Vertical Milling Column
A basic machine shop classroom
• • • • • • • • • • • • • • • 4000 (4100) Lathe Specifications Swing over bed 3.50” (90 mm) Swing over table Distance between centers Hole through spindle Crosslide travel Spindle nose external thread Spindle nose internal taper Hole through spindle Tailstock spindle int. taper Cutting tool size Electronically controlled spindle speed range Length overall Width overall Height overall Shipping Weight 1.88” (48 mm) 8.00” (200 mm) .405” (10 mm) 4.25” (110 mm) 3/4 -16 #1 Morse .