Owner`s manual

23824113
Technical Data
Power Requirements 120 VAC, 60 Hz,. . . . . . . . . . . . . . . . . . . .
1 phase, 15A minimum
Generator 3000W minimum. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working Pressure Range 0–3000 psi (0–210 bar, 0–21 MPa)
Motor 3/4 hp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cycles/Gallon (liter) 620 (164). . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery 0.50 gpm (1.9 lpm). . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tip Size one gun to 0.023 new tip. . . . . . . . . . . . . . . . . . . . . . . .
with latex at 2000 psi (138 bar, 13.8 MPa)
Power Cord 14 AWG, 3 wire, 6 ft (1.8 m). . . . . . . . . . . . . . . . . .
Inlet Paint Strainer 12 mesh (1525 micron). . . . . . . . . . . . . . . .
Stainless Steel Screen, reusable
Pump Inlet Size 1/2 npt(f). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Outlet Size 1/4 npsm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wetted Parts:
Displacement Pump Stainless steel, Carbon steel,. . . . . . .
PTFE, Aluminum, Polyethylene, Delrin , Leather
NOTE: and Delri is a nare trademarks of the Company.
French 194177
Spanish 185961
German 186041
Greek 186045
Korean 186049
English 194176
Apply other
language here

DANGER LABELS
An English language DANGER label is on your
sprayer. If you have painters who do not read
English, order one of the following labels to ap-
ply to your sprayer. The drawing shows the best
placement of these labels for good visibility.
Order the labels from your Graco distributor.
Dimensions
Model 820169 Model 824175
Weight (dry w/o
packaging)
37 lb (17 kg) 61 lb (27.7 kg)
Height 19 in. (483 mm) 29.5 in. (749 mm)
Handle down
39.5 in. (1003 mm)
Handle up
Length 15 in. (381 mm) 21 in. (533 mm)
Width 14 in. (356 mm) 20.5 in. (521 mm)
PTFE