Operating instructions
CM-Direct Driven Operator’s Manual 2013 3
INTRODUCTION
Congratulations on the purchase of your new Tradeworks® pressure washer! You can be assured your Trade-
works® pressure washer was constructed with the highest level of precision and accuracy. Each component
has been rigorously tested by technicians to ensure the quality, endurance and performance of this unit. With
over twenty ve years of experience in building pressure washers, you have made a wise decision to go with a
Tradeworks® pressure washer.
This operator’s manual was compiled for your benet. Reading and following the simple safety, installation,
operation, maintenance and troubleshooting steps described in this manual, will help further extend the trouble
free operation you can expect from your new Tradeworks® pressure washer. The contents of this manual are
based on the latest product information available at the time of publication. The manufacturer reserves the right
to make changes in price, color, materials, equipment, specications or models at any time without notice.
! IMPORTANT !
THESE PARAGRAPHS ARE SURROUNDED BY A “SAFETY ALERT BOX”. THIS BOX IS USED
TO DESIGNATE AND EMPHASIZE SAFETY WARNINGS THAT MUST BE FOLLOWED WHEN
OPERATING THIS PRESSURE WASHER. ACCOMPANYING THE SAFETY WARNINGS ARE
“SIGNAL WORDS” WHICH DESIGNATE THE DEGREE OR LEVEL OF HAZARD SERIOUSNESS. THE
“SIGNAL WORDS” USED IN THIS MANUAL ARE AS FOLLOWS:
DANGER: INDICATES AN IMMINENTLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, WILL
RESULT IN DEATH OR SERIOUS INJURY.
WARNING: INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD
RESULT IN DEATH OR SERIOUS INJURY.
CAUTION: INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED MAY
RESULT IN MINOR OR MODERATE INJURY.
THE SYMBOLS BELOW THIS PARAGRAPH ARE “SAFETY ALERT SYMBOLS”. THESE SYMBOLS ARE
USED TO CALL ATTENTION TO ITEMS OR PROCEDURES THAT COULD BE DANGEROUS TO YOU
OR OTHER PERSONS USING THIS EQUIPMENT.
ALWAYS PROVIDE A COPY OF THIS MANUAL TO ANYONE USING THIS EQUIPMENT. READ ALL
INSTRUCTIONS BEFORE OPERATING THIS PRESSURE WASHER AND ESPECIALLY POINT OUT
THE “SAFETY WARNINGS” TO PREVENT THE POSSIBILITY OF PERSONAL INJURY TO THE
OPERATOR.
Once the unit has been removed from the box, immediately write in the serial number of your unit in the space
provided below.
SERIAL NUMBER_________________________________
Inspect the contents of the carton for damage. If something appears to be damaged, DO NOT RETURN TO
PLACE OF PURCHASE. Contact your Tradeworks® Customer Service Representative at 800-553-9053
Please have the following information available for all service calls:
1. Model Number
2. Serial Number
3. Date and Place of Purchase
Mi-T-M Corporation
8650 Enterprise Drive
Peosta, IA 52068-0050