user manual

ENGLISH
46
Continued
5. Press the CURSOR UP/DOWN buttons to select
“Apply”, then press the OK button.
■When selecting the Manual or the Dynamic
• Then the network test is automatically performed and the
result is displayed.
• Press the OK button to confirm the test result. Then the
network information will be displayed.
■When selecting the Off
• The values for IP Address, Subnet Mask, Gateway,
Primary DNS and Secondary DNS are all cleared.
• Then the network test is automatically performed and the
result is displayed.
• Press the OK button to confirm the test result. Then the
network information will be displayed.
When selecting the Network Test
VR-654(G)_ENG_100129_VR-654(G) 2010-01-29 오전 10:45 페이지 46