Operating instructions
ENGLISH
5
D
IGI LINK DIGITAL
O
PT
A
NALOG
L
R
S
N.
POWER SOURCE
P
OWER CONSUMPTION
COMPACT DISC PLAYER
C
D-5505
230V 50Hz
1
4 W
D
ESIGNED IN USA
A
SSEMBLED IN CHINA
45
Rear Panel Connections
• Do not plug the AC input cord into the AC outlet when making connections.
• Be sure to connect the white plugs to the L(Left) jacks and the red plugs to the R (Right) jacks when making
connections.
• Refer to the connecting diagram in the operating instructions of your amplifier/receiver
• Connect the ANALOG L and R jacks to the CD IN jacks of
your amplifier/receiver.
1. CONNECTING ANALOG AUDIO OUTS
• Connect this jack to the DIGILINK jack of Sherwood system
amplifier/receiver to control this unit remotely by DIGILIN II or
III system. (For details, refer to the operating instructions of
Sherwood amplifier/receiver.)
■Note :
• The DIGILINK operation may not work on some Sherwood
components.
2. CONNECTING DIGILINK
• Connect this jack to the OPTICAL DIGITAL IN jack of your
amplifier/receiver to enjoy digital sound.
■Notes :
• It is not recommended to record digital audio signals with
digital audio connection between this unit and MD or CD
recorder, etc.. When recording the sounds played on this unit,
record them through the ANALOG AUDIO OUT jacks.
• Some of the commercially available optical fiber cords cannot
3. CONNECTING OPTICAL DIGITAL OUT
• Plug the cord into a wall AC outlet.
4. AC INPUT CORD
• This terminal may be used in the future to update the operating software, etc.
■Note :
• Programming for upgrade requires specialized programming knowledge and for that reason we recommend that it only be
done by qualified installers.
5. TERMINAL FOR UPGRADE
ANALOG
L
R
Amplifier/receiver
CD IN
DIGI LINK
Sherwood amplifier/receiver
DIGILINK
DIGITAL
OPT
Amplifier/receiver
OPTICAL IN
be used for the equipment. If there is an optical fiber cord which cannot be connected to your equipment, consult your dealer
or nearest service organization.
CD-5505(G)_ENG_110113_CD-5505(G)_ENG2011-01-24오전9:28페이지5